The general composition of the rubber was approximately the same as ordinary crepe obtained from undiluted latex. The rubber on vulcanisation was found to be normal in behaviour, and was similar to the controls.
The coagulum ordinarily is affected by oxidation, and does not produce a fine pale crepe. To remedy this defect the freshly prepared crepe is soaked in a solution of sodium bisulphite and sulphuric acid.
It may be noted that in the recent experiments coagulation was effected in vacuum in a specially designed wooden tank. From a study of the [previous section] on “Spontaneous Coagulation,” the reader will perceive that results equal to those obtained by the Ilcken-Down process can be obtained without the necessity of using such agents as alcohol, petrol, or fusel oil.
Slab Rubber.—This type of preparation has been the subject of much discussion of recent years. There is nothing really special in the mode of preparation, and in its original form “slab” rubber is only a thick sheet which may be obtained by coagulation with acetic acid or other agents.
The coagulum, when removed from the serum, is subjected to comparatively slight pressure, and the “slab” thus made is either placed to air-dry at once, or may be subject to treatment in other liquids before drying.
The rubber is not allowed to remain until wholly dry, but is shipped while still containing an appreciable percentage of enclosed moisture.
It is claimed[34] that the production of “slab” rubber by standardised methods eliminates to a great degree the variability which at present characterises plantation rubber, and that a fast-curing medium is obtained. These claims will be discussed in [later chapters] dealing with the vulcanisation of rubber, and demand no notice in this section.
[34] “Preparation and Vulcanisation of Plantation Rubber” (Eaton, Grantham, and Day), Bulletin No. 27, F.M.S. Department of Agriculture, 1918.
From the producers’ point of view, it may be noted that the preparation of slab rubber is a simple process, but not altogether as pleasant probably as might be desired, when undertaken in crude form.
The appearance of the partially dry slabs is unattractive, but that does not signify if the quality of the vulcanised product satisfies requirements.