FRINGE... Cut 5 strands of light color, each 10″ long. Double these strands, forming a loop. Pull loop through last dc made, and draw loose ends of fringe through this loop. Pull tight. Make fringe in every 4th dc across short side only. Trim ends evenly. Finish opposite end to correspond.
CHAIR SET No. 7165-B
Completed chair back measures about 10″ x 16″, and each arm piece about 8″ x 9″, omitting fringe.
CHAIR BACK... Starting at bottom, with dark color make a chain about 18″ long. 1st row: Dc in 4th ch from hook, dc in each ch across until there are 171 dc in the row, counting turning ch as 1 dc. Cut off remaining chain. Ch 3, turn. 2nd and 3rd rows: Dc in each dc across. Ch 3, turn. Do not ch 3 to turn at end of 3rd row, but leave the last 2 loops of last dc on hook, attach light color and draw through the 2 loops. Ch 3, turn. Hereafter follow chart for chair back, starting at the 4th row from bottom, and work to top of chart, always concealing unused color as in Runner 7165-A.
FRINGE... Make fringe across lower edge of chair back as for Runner 7165-A.
ARM PIECES... Starting at bottom, ch 83 (to measure about 9″), and follow chart for arm piece (working as for chair back). Make fringe at lower edge as for chair back.
CHART FOR RUNNER, CHART FOR CHAIR BACK, and CHART FOR ARM PIECES
—LIGHT