1. Remove the filter element, clean in kerosene, and allow to dry thoroughly.
2. Clean the oil reservoir.
3. Pour one pint of new engine oil into the reservoir. S.A.E. 50 for above 32° F. (0° C.) S.A.E. 20 for below 32° F. (0° C.) is recommended for this purpose. Do not use an oil lighter than S.A.E. 20 in the cleaner at any time.
4. Reassemble element and filter unit and install on car.
OIL BATH AIR CLEANER
WING NUT COVER AND FILTER ASSEMBLY OIL LEVEL RESERVOIR
Draining The Cooling System
To drain the cooling system, drain the radiator, block, and, if car is so equipped, Climatizer and defroster.
