Figure 154
Bark Canoe of the Kutenai and Shuswap, about average in size and proportion. Original in the Museum of the American Indian, New York.
The canoes had 3-part gunwales consisting of inwale, outwale, and cap, but in many the arrangement of these was such that this nomenclature is misleading. In the latter construction, a lower inwale was used, as in the above drawing; rather small in cross section, it was almost square, with rounded edges. The rib ends, after passing through slits in the bark cover below the lower inwale, continued upward past it, outside the bark cover. Above the lower inwale and inside the bark cover was a larger upper inwale; this was flat on the outboard and bottom sides, the top and inboard sides being rounded into one another. The outwale, roughly rectangular in cross section, clamped the bark cover and heads of the ribs between it and the upper inwale. The ribs and bark were trimmed off flush with the tops of the outwale and upper inwale. The thwart amidships was caught, at the ends, between the lower and upper inwales. The gunwale members and bark cover were secured by group lashings of small extent and rather widely spaced.
The methods of fitting the thwarts differed in this class of canoe, and it cannot be determined with certainty whether this variation was tribal or the choice of the individual builder. In canoes having the lower inwale arrangement there was but one thwart amidships. As has been said, its ends were caught between the upper and lower inwales. Directly beneath it was a rib whose head was not brought up outside the bark cover but, after being secured to the uppermost sheathing batten, was brought around inboard in a quick hard turn and secured along the underside of the thwart with a close spiral lashing. Under this rib at the topmost batten was secured a short false rib head by forcing the beveled foot of the false rib between the batten and the true rib, after lashing; the head of the false rib was then brought up through and outside the bark cover in the customary manner, or it might be forced under the lower inwale, inside the bark cover. In this construction, the endmost ribs were at the gunwale ends, and the heads of these were lashed to the stem battens outside the gunwale ends, on the outside of the bark cover.
Figure 155
Ojibway Canoe Construction. (See pp. [122]-131.)
(Canadian Geological Survey photos.)
Peeling bark.