Страница - 188Страница - 190
- PRICE: $4,500; $4,700 with revolving seats
- BODY: Limousine
- SEATS: 5–7 persons
- WHEEL-BASE: 115 inches
- TREAD: 56 inches
- TIRES, FRONT: 36 × 4 in.
- TIRES, REAR: 36 × 5 in.
- STEERING: Worm and segment
- BRAKES: Contracting and expanding on rear wheels
- SPRINGS: Semi-elliptic
- FRAME: Armored wood
- BORE: High pressure, 3 in.; low pressure, 6 in.; STROKE: 4½ in.
- CYLINDERS: 2 vertical, compound
- VALVE ARRANGEMENT: Stephenson link motion
- MOTOR SUSPENSION: On cross members
- CONDENSER: Tubular
- REGULATION: Automatic
- BOILER: Flash type
- LUBRICATION: Force feed
- MOTOR-CONTROL: Throttle
- CHANGE SPEEDS: All speeds direct
- DRIVE: Shaft
Clark Steam Car, 25 H.P. Edw. S. Clark, Boston, Mass.
- PRICE: $5,000
- BODY: Side entrance tonneau
- SEATS: 7 persons
- WEIGHT: 3,800 pounds
- WHEEL-BASE: 110 inches
- TREAD: 56 inches
- TIRES, FRONT: 36 × 4½ inches
- TIRES, REAR: 36 × 4½ inches
- STEERING: Wheel, movable column
- BRAKES: 2 on each rear hub, 1 on shaft
- SPRINGS: Semi-elliptical
- FRAME: Pressed channel steel
- BORE: 3¼ in.; STROKE: 3½ in.
- CYLINDERS: 4 horizontal opposed
- VALVE ARRANGEMENT: Poppet operated by cams
- MOTOR SUSPENSION: Under frame
- CONDENSER: Vertical fin tube condenser
- BURNER: Closed bottom, 4 inlets and pilot light
- FUEL REGULATION: Steam pressure and hand valve
- BOILER: Flash type
- LUBRICATION: Force feed
- ENGINE: Throttle on steering column and reverse lever
- CLUTCH: Positive sliding
- CHANGE GEAR: Sliding type
- SPEEDS: Two speeds
- CHANGE-GEAR CONTROL: Side lever
- DRIVE: Shaft and bevel gear
Boss Steam Runabout. Boss Knitting Machine Works, Reading, Pa.
- BODY: Runabout
- SEATS: 2 persons
- WEIGHT: 1,250 pounds
- WHEEL-BASE: 75 inches
- TREAD: 56 inches
- TIRES, FRONT: 30 × 3 inches
- TIRES, REAR: 30 × 3 inches
- STEERING: Side lever
- BRAKES: On driving shaft
- SPRINGS: Full elliptic
- HORSE-POWER: 10
- ENGINE SUSPENSION: Under body
- BURNER: Kerosene
- BOILER: 18-inch flash
- CHANGE-GEAR CONTROL: Side lever
- DRIVE: Shaft