Strings and loops for fine under-linen (fig. [28]).—Sew these on, likewise, on the wrong side of the article, hemming down the ends, and fastening them on the right side, with two rows of stitching crossing each other, and a third row along the edge.
Fig. 28. Strings and loops on fine under-linen.
Button-holes in linen (fig. [29]).—Cut your hole perfectly straight, and of exactly, the diameter of the button, having previously marked out the place for it, with two rows of running-stitches, two or three threads apart. Put in your needle at the back of the slit, and take up about three threads, bring the working thread round, from right to left under the point of the needle, and draw the needle out through the loop, so that the little knot comes at the edge of the slit, and so on to the end, working from the lower left-hand corner to the right. Then make a bar of button-hole stitching across each end, the knotted edge towards the slit.
Fig. 29. Button-holes in linen.
Button holes in dress materials (fig. [30]).—Mark out and cut them as above described; if however, the material be liable to fray, wet the slit as soon as you have cut it, with liquid gum, and lay a strand of strong thread along the edge to make your stitches over; one end of dress button-holes must be round, the stitches diverging like rays from the centre, and when you have worked the second side, thread the needle with the loose strand, and pull it slightly, to straighten the edges; then fasten off, and close the button-hole with a straight bar of stitches across the other end, as in fig. [29].