Fig. 77. Open-work insertion.

Fig. [76] requires the drawing out of eighteen threads, fig. [77], of thirty. Both admit of several colours being used.

Open-work insertion (fig. [78]).—After drawing out sixteen or eighteen threads, bind both sides with stitches made over four horizontal and four perpendicular threads, as follows; make one back-stitch over four disengaged threads, then bring up your thread from right to left, over four horizontal and under four perpendicular threads, back over the four last threads, and draw it out beside the next cluster. The clusters, as they now stand, are bound together in the middle, three by three, with darning-stitches. The thread must be fastened in and cut off, after each group is finished.

Fig. 78. Open-work insertion.

Open-work insertion (fig. [79]).—First bind the two edges with stitches, in the ordinary way. At the last stitch introduce the thread slanting, according to the dotted line, pass it under four horizontal and three perpendicular threads of the stuff and draw it out; then over three threads from right to left, and back under the same, from left to right, and out again; over four horizontal threads, and, under and again over, three perpendicular ones; for the next stitch, you again follow the dotted slanting line.

Fig. 79. Open-work insertion.

Then make the darning stitch over nine threads, or three clusters. At half their length, you leave out three threads, first on the right, then on the left, whilst in the other half, you, in a similar manner, take in three; so that you have two darned and two undarned clusters, standing opposite each other. Finally, you overcast the single clusters, and connect every two with a lock-stitch, as shown in the accompanying illustration.