Make the skirt band
1. Measure your waist. Add 2½ inches. This will give you the length needed for your skirt band. Cut your band 6½ inches wide.
2. Press a ½-inch fold along one side of your band. From the folded edge divide the rest into three sections. This gives three 2-inch sections. Make the section with the ½-inch fold slightly shorter than the other two sections. Press.
3. The section with the ½-inch fold is the front of your band. Stitch criss-cross through the back part of the band. You can stitch straighter if you make a guide or pattern. Cut a strip of waxed paper the length and width of your band, 24 x 2 inches.
Fold it in six equal sections. Then fold it diagonally; then diagonally again. Open the paper and pin it to the band and follow the creases in the paper. This will give practice on starting and stopping the machine and on turning corners. Tear the paper away after the stitching is completed.
4. Stitch a ½-inch seam at the ends of the band. Turn and press. Do not sew the ½-inch fold at bottom of band into the seam.
Gather in fullness
Divide both your skirt and the skirt band into eight equal parts to help you make the gathers even in your skirt. Do not include the placket or 1-inch overlap at the end of the band. Mark with colored threads. Mark the skirt band so the extension or extra length will be on the back of the placket. The front of band will be even with the front edge of the placket.