Pin the band together and mark place for buttons. See [page 2] for instructions for sewing on buttons.
Sew fasteners to skirt band
Snaps—Examine the snap fasteners. One part has a ball on top. This is placed on the front part or top of your placket. The other part has a hole or socket and is placed on the back or under part of the placket. Place them exactly opposite each other on your placket.
Sew the top snap on first. Mark the placing of the bottom part of the snaps by rubbing chalk on the ball and then pinning placket together. Press ball against fabric. The chalk will rub off and mark the exact spot to sew the under part of the snap.
Sew snap fasteners on with several over-and-over stitches. Be sure to hide your knot under the snap. Sew securely through all four holes. When you cross from one hole to the other, take a stitch in the cloth and bring your needle up from the under side to the next hole.
Hooks and eyes—Each package of hooks and eyes, has two types of eyes, a round and a straight. Use the round eye for your skirt. Sew the hook on the inside edge of the top part of your band. (You will need two.) Sew these with several over-and-over stitches.
Sew several stitches through the hook end. Pin the placket in place and place the round eye directly under the hook. Sew with several over-and-over stitches.
Press all the things you have made. Pressing will improve their appearance. Make sure they are clean.