| figure 66. | |
| fig. 62. |  |
| fig. 63. | |
| fig. 64. | |
| fig. 65. |
Suppose the focal distance of the great mirror was 9 inches, and the focal distance of the small mirror 1½ inch—were we to remove the eye piece of this telescope, and look through the hole of the great mirror, we should see the image of the object depicted upon the face of the small speculum, and magnified, in the proportion of 9 to 1½, or, 6 times, on the same principle as a common convex object glass 9 inches focal length, with an eye glass whose focus is 1½ inch magnifies 6 times. This may be regarded as the first part of the magnifying power. If now, we suppose the small speculum placed a little more than 1½ inch from the image formed by the great speculum, a second image is formed about f, as much exceeding the first in its dimensions as it exceeds it in distance from the small speculum, on the principle on which the object glass of a compound microscope forms a large image near the eye glass. Suppose this distance to be 9 times greater, then the whole magnifying power will be compounded of 6 multiplied by 9, or 54 times. As a telescope it magnifies 6 times, and in the microscope part 9 times.—Such is a general idea of the Gregorian telescope, the minute particulars and structure of which can only be clearly perceived by a direct inspection of the instrument.
The Newtonian Reflector.—This instrument is somewhat different both in its form and in its mode of operation from that of Gregory. It is represented in fig. 63, where BAEF is the tube, and BE, the object concave mirror, which reflects the parallel rays ab to a plane speculum G, placed 45°, or half a right angle to the axis of the concave speculum. This small plane reflector must be of an oval form, the length of the oval should be to the breadth as 7 to 5, on account of the obliquity of its position. It is supported on an arm fixed to the side of the tube; an eye-glass is placed in a small tube, moveable in the larger tube, so as to be perpendicular to the axis of the large reflector, the perpendicular line passing through the centre of the small mirror. The small mirror is situated between the large mirror and its focus, that its distance from this focal point may be equal to the distance from the centre of the mirror to the focus of the eye-glass. When the rays ab from a distant object fall upon the large speculum at cd, they are reflected towards a focus at h; but being intercepted by the plane mirror G, they are reflected perpendicularly to the eye-glass at I, in the side of the tube, and the image formed near that position at e is viewed through a small plano-convex lens. The magnifying power of this telescope is in the proportion of the focal distance of the speculum to that of the eye-glass. Thus, if the focal distance of the speculum be 36 inches, and that of the eye-glass 1/3 of an inch, the magnifying power will be 108 times. It was this form of the reflecting telescope, that Newton invented, which Sir. W. Herschel adopted, and with which he made most of his observations and discoveries.
The Cassegrainian Reflector.—This mode of the reflecting telescope, suggested by M. Cassegrain, a Frenchman, is represented in fig. 64. It is constructed in the same way as the Gregorian, with the exception of a small convex speculum G being substituted in the room of the small concave in Gregory’s construction. As the focus of a convex mirror is negative, it is placed at a distance from the large speculum equal to the difference of their foci, that is, if the focal length of the large speculum be 18 inches, and that of the small convex 2 inches, they are placed at 16 inches distant from each other, on a principle similar to that of the Galilean telescope, in which the concave eye-glass is placed within the focus of the object-glass by a space equal to the focal length of the eye-glass. In this telescope, likewise, instead of two there is only one image formed, namely that in the focus of the eye-glass; and, on this account some are of opinion that the distinctness is considerably greater than in the Gregorian. Mr. Ramsden was of opinion that this construction is preferable to either of the former reflectors, because the aberrations of the two metals have a tendency to correct each other, whereas in the Gregorian both the metals being concave, any error in the specula will be doubled. It is his opinion that the aberrations in the Cassegrainian construction to that of the Gregorian is as 3 to 5. The length of this telescope is shorter than that of a Gregorian of equal focal length, by twice the focal length of the small mirror, and it shows every thing in an inverted position, and consequently is not adapted for viewing terrestrial objects.
Dr. Hook’s Reflector.—Before the reflecting telescope was much known, Dr. Hook contrived one, the form of which is represented, fig. 65, which differs in little or nothing from the Gregorian, except that the eye-glass I is placed in the hole of the great speculum BE.
Martin’s Reflector.—Mr. Bengamin Martin, a distinguished writer on optical and philosophical science, about a century ago, described a new form of the reflecting telescope, approximating to the Newtonian structure, which he contrived for his own use. It is represented in fig. 66. ABEF is the tube, in which there is an opening or aperture OP, in the upper part. Against this hole within the tube is placed a large plane speculum GH, at half a right angle with the axis or sides of the tubes, with a hole CD perforated through its middle. The parallel rays a b falling on the inclined plane GH are reflected perpendicularly and parallel on the great speculum BE in the bottom of the tube. From thence they are reflected converging to a focus e through the hole of the plane mirror CD, which being also the focus of the eye-glass IK, the eye will perceive the object magnified and distinct.
In the figures referred to in the above descriptions, only one eye-glass is represented to avoid complexity; but in most reflecting telescopes, the eye-piece consists of a combination of two plano-convex glasses, as in fig. 67, which produces a more correct and a larger field of view than a single lens. This combination is generally known by the name of the Huygenian eye-piece which shall be described in the section on the eye-pieces of telescopes.
The following rule has been given for finding the magnifying power of the Gregorian telescope:—Multiply the focal distance of the great mirror by the distance of the small mirror from the image next the eye; and multiply the focal distance of the small mirror by the focal distance of the eye-glass; then divide the product of the former multiplication by the product of the latter, and the quotient will express the magnifying power. The following are the dimensions of one of the reflecting telescopes constructed by Mr. Short—who was long distinguished as the most eminent maker of such instruments, on a large scale, and whose large reflectors are still to be found in various observatories throughout Europe.
The focal distance of the great mirror 9.6 inches; or P m, fig. 67, its breadth FD 2.3; the focal distance of the small mirror L n 1.5—or 1½ inch—its breadth g h 0.6—or 6/10 of an inch; the breadth of the hole in the great mirror UV, 0.5—or half an inch—the distance between the small mirror and the next eye-glass LR, 14.2; the distance between the two eye-glasses SR, 2.4; the focal distance of the eye-glass next the metal, 3.8.; and the focal distance of the eye-glass next the eye, S a 1.1, or one inch and one tenth. The magnifying power of this telescope was about 60 times. Taking this telescope as a standard, the following table of the dimensions and magnifying powers of Gregorian reflecting telescopes, as constructed by Mr. Short, has been computed.
figure 67.