Fig. 79.
At [Figure 78] is represented a lamp that is to be fastened to the side of the wall, instead of hanging from the ceiling with a chain. The light is inverted, the lamp being open at the top and closed at the bottom.
The stock used in the construction of the lamp is very heavy, No. 14 soft steel being used. The angle plates on the corners are made from No. 20 soft steel. The plate that is on the back of the lamp has a cup-shaped pocket hammered into it to cover the wiring when the lamp is in place, and on which the light socket is fastened.
In [Figure 79] is shown a cross-section of the back plate, with the depression and socket in place.
This kind of lamp is very simple to make and can be made in various shapes and sizes. The back of the lamp can be made of wood instead of metal, if desired.
Wrought Iron Table Lamps.