Synthetic resins and their raw materials / A survey of the types and uses of synthetic resins, the organization of the industry, and the trade in resins and raw materials, with particular references to factors essential to tariff consideration. Under the general provisions of section 332, title III, part II, Tariff act of 1930.

by United States Tariff Commission

The alkyd resins, used principally in paints, varnishes, and lacquers, are a group of condensation products synthesized by reacting polyhydric alcohols, such as glycerin and the glycols, with dibasic organic acids, such as phthalic, maleic, succinic, and sebacic. The condensation product is almost always modified to give properties to the resin desirable or essential to the specific application contemplated. The modifying agent may be a drying, semidrying, or nondrying oil; the fatty acid of an oil; a natural resin, such as rosin; a synthetic resin of the tar-acid group or of the urea-formaldehyde type; or other substance. Up to the present time unmodified alkyd resins have not been commercially important.

A wide variety of types is obtained by the use of different materials and different modifiers. The variations begin with the dibasic acid used, and with the polyhydric alcohol used. The modifications possible are practically endless, and almost any fixed oil or the corresponding fatty acid, and most of the natural or synthetic resins may be used. The importance of the modifier is shown by the proportion used in most alkyd resins. On the average, approximately 50 percent of the total weight of the drying and semidrying alkyd resin products is modifier, 30 percent dibasic acid, and 20 percent polyhydric alcohol. The proportions will, of course, vary with individual types. Certain types on the market contain only 25 percent modifier while others have as much as 75 percent.

In a new industry such as this, rapid changes in types and applications must be expected. Extensive research is being carried on by various groups. The raw material makers are seeking cheaper products or those with special properties; the resin makers are investigating an endless number of modifications, and the makers of surface coatings are testing most of the new types offered.

Development and patents.

Probably the earliest record of research leading to the development of the alkyds was that of van Bemmelen, who reported in a German technical journal in 1856 the sirupy products obtained by heating together succinic acid and glycerin or citric acid and glycerin. The first investigation of the phthalic anhydride-glycerin resins was recorded in 1901.[3] Watson Smith, while engaged in research on phthalein dyes, obtained a transparent, highly refractive resinlike substance when glycerin and phthalic anhydride were heated together. Smith recommended the product as a cement for ceramic wares.

During the period 1910-16 the research laboratories of the General Electric Co., engaged in research on a synthetic resin from glycerin and phthalic anhydride. As a result of these studies numerous patents were granted for this type of resin to which the trade name Glyptal was applied. Intensive research was carried on by several firms, many variations were developed, and literally hundreds of patents were granted.

The paint and varnish industry has been undergoing radical readjustment. Methods and natural products, which for decades or centuries had changed very little, are giving way to synthetic creations of our laboratories. The first important departure from the traditional practices was the development of nitrocellulose lacquers. The commercial application of the alkyd resins followed, and their use is increasing rapidly. Because this development is still comparatively young, the large number of modifications offered has confused the coating manufacturer. It is probable that many of the synthetic products now being marketed have no special technical or economic justification and that they will in time lose out in competition with better products known at present, or still to be developed.

United States Patent No. 1,893,873, dated January 10, 1933, granted to R. H. Kienle and assigned to the General Electric Co., was considered one of the basic patents in this field. Early in 1936 it was declared invalid in a suit claiming infringement brought against the Paramet Chemical Co. of Brooklyn, N. Y. The decision in this case seems to have opened the glycerin-phthalic anhydride resins to a large number of manufacturers.

Among the principal brands of alkyd resins now on the domestic market are Beckosol, Dulux, Esterol, Glyptal, Rezyl, and Teglac. Each of these trade names identifies a series of products.