Figure 21. Ship’s dispensary showing portable operating table, operating lights, and shelves and cabinets for medical supplies.
d. Carpenter shop.
(1) The carpenter shop is on the first platform deck on the starboard side of number 2 hatch. (See fig. [6].) The main equipment of this shop consists of a universal woodworking machine, a 32-inch band saw, and a portable electric saw.
(2) The universal woodworking machine (fig. [37]), is powered by a 5-hp, 3-phase, 60-cycle, 208-volt motor, developing 3,425 rpm and is equipped with 14-and 16-inch blades.
(3) The 32-inch band saw (fig. [38]) is powered by a 3-hp, 3-phase, 60-cycle, 208-volt motor, developing 600 rpm. It is supplied with general-purpose blades, a ripping fence, and a resaw guide.
(4) The portable circular saw is run by a 110-volt universal motor. (See fig. [39].) It is equipped with two combination blades for sawing wood; when abrasive discs are used, it will cut brick, stone, concrete, steel, and cast iron.
e. Pipe shop.
(1) The pipe shop adjoins the machine shop and its main equipment consists of a portable pipe bender and a pipe and bolt threading machine. (See fig. [40].)