Note.—To call a station, make the call letter until acknowledged, at intervals giving the call or signal of the calling station. If the call letter of a station is unknown, wave flag until acknowledged. In using the searchlight without shutter throw the beam in a vertical position and move it through an arc of 180° in a plane at right angles to the line connecting the two stations until acknowledged. To acknowledge a call, signal "Acknowledgment" followed by the call letter of the acknowledging station.
Signaling with Heliograph, Flash lantern, and Searchlight (With Shutter.)
GENERAL SERVICE CODE.
26. The first position is to turn a steady flash on the receiving station. The signals are made by short and long flashes. Use a short flash for dot and a long steady flash for dash. The elements of a letter should be slightly longer than in sound signals.
27. To call a station, make its call letter until acknowledged.
28. If the call letter of a station be unknown, signal A until acknowledged. Each station will then turn on a steady flash and adjust. When adjustment is satisfactory to the called station, it will cut off its flash and the calling station will proceed with its message.
29. If the receiver sees that the sender's mirror or light needs adjustment, he will turn on a steady flash until answered by a steady flash. When the adjustment is satisfactory the receiver will cut off his flash and the sender will resume his message.
30. To break the sending station for other purposes, turn on a steady flash.
SOUND SIGNALS.
56. Sound signals made by the whistle, foghorn, bugle, trumpet, and drum may well be used in a fog, mist, falling snow, or at night. They may be used with the dot and dash code.