a. Remove.
(1) Shut off fuel supply valve.
(2) Remove pipe union nut from tank nipple. Remove pipe after disconnecting union nut from fuel strainer body nipple.
b. Install. Fuel pipe must be installed without putting undue twist or strain on pipe or end fittings. Therefore, bend and/or shape pipe to “fit” between nipple connections before replacing and drawing up on union nuts.
(1) Connect lower end of pipe to fuel filter body nipple. Do not tighten nut.
(2) Connect upper end of pipe to tank nipple. Securely tighten this nut. Next, tighten union nut on strainer body nipple.
Section XVII
INTAKE AND EXHAUST SYSTEM
| Paragraph | |
|---|---|
| Description | [75] |
| Air cleaner | [76] |
| Hose and carburetor fitting | [77] |
| Remove air cleaner | [78] |
| Install air cleaner | [79] |
| Replacement of air cleaner mounting bracket | [80] |
| Exhaust system | [81] |