c. Remove Brake Shoes ([fig. 61]).
(1) Remove rear wheel (par. [127]).
(2) Remove brake drum and sprocket assembly. Brake shoes are now accessible. Do not remove side cover assembly from frame.
(3) Disconnect brake rod clevis at brake operating lever.
(4) Place end of large screwdriver blade between ends of brake shoes at pivot stud. Move brake‐operating lever forward to hold brake shoes in fully expanded position, and pry ends of shoes off pivot stud without removing brake shoe springs.
d. Install Brake Shoes. Observe that brake shoes are made for upper and lower positions and are not interchangeable. Recess in end of shoe for pivot stud head determines position of shoe in assembly.
(1) Engage ends of springs in shoe assembly holes from the inside before installing shoes on side cover ([fig. 61]).
(2) With brake shoes and springs assembled, install so that ends of shoes will slip over pivot stud and shaft‐operating cam.
(3) Connect brake rod clevis to brake operating lever.