Section XXII
SHEET METAL AND EQUIPMENT
| Paragraph | |
|---|---|
| Chain guards | [102] |
| Carriers | [103] |
| Mudguards | [104] |
| Battery box | [105] |
| Tool box | [106] |
| Tanks | [107] |
| Stands | [108] |
| Saddle post | [109] |
| Safety guards | [110] |
| Skid plate | [111] |
102. CHAIN GUARDS.
a. Remove Outer Front Chain Guard (figs. [68] and [69]).
(1) Remove nut and washer which secures center of chain guard and skid plate left‐side support bracket.
(2) Loosen skid plate support bracket lower bolt and nut and remove bracket from stud.
(3) Loosen the nut which secures footboard rear stud to sidebar, then remove nut which secures footboard front stud to sidebar. Pull front end of footboard away from sidebar so that stud will clear end of safety guard.
(4) Remove extended nut which secures sidebar to frame front support rod.
(5) Disconnect clutch control cable end at clutch foot pedal by removing cotter pin and plain washer from stud.
(6) Left side footboard, sidebar, and clutch foot pedal assembly can now be removed. If rear end of sidebar is lowered, the front end will clear end of safety guard.