RA PD 315729
Figure 69—Outer Front Chain Guard Removed
(4) Attach front end of sidebar. Install extended nut and lock washer to secure front sidebar and support rod mounting.
(5) Install skid plate support bracket on support rod (in center of chain guard), tightening nut on bolt. Install nut and lock washer which secure skid plate bracket and chain guard on rear support rod. Tighten nut.
(6) Pull front end of footboard away from sidebar so that hole in end of safety guard lines up with hole in sidebar, then pass footboard stud through both pieces, installing washer and securing stud nut. Tighten footboard rear stud nut.
(7) Attach brake control cable end to foot pedal stud.
c. Remove Rear Chain Guard.
(1) Remove cap screw which secures rear chain oil pipe clamp, and provides mounting for front end of chain guard on transmission sprocket cover. Remove chain guard.
(2) Remove chain guard from rear mounting by pushing the guard back so that stud (with washers and spring) slips out of mounting clip notch.