b. Install Front Mudguard.
(1) Locate mudguard in mounting position. Engage slots in stay clips on rocker plate studs, installing the special locks in the clip slots. NOTE: Brace clip locks are made for right and left side installation. Secure both clip locks with stud nuts.
(2) Attach ends of ammunition and scabbard carriers to rocker plate studs. Secure with lock washers and nuts.
(3) Mount mudguard to rigid fork bracket. Tighten the two screws, washers, and nuts.
(4) Attach lower end of headlight bracket to mudguard with two bolts, washers, and nuts.
(5) Attach ammunition box carrier bracket to mudguard. Tighten bolt, washer, and nut.
(6) Attach gun scabbard carrier bracket to mudguard. Tighten bolt, washer, and nut.
(7) Reinstall front wheel and brake assembly (par. [125]).
(8) Connect mudguard blackout light wire to switch terminal. Refer to wiring diagram, [figure 73].
(9) Install instrument panel cover (par. [119]).