b. Remove. Disconnect battery ground wire. Remove instrument panel cover (par. [119]). Disconnect all wires from switch. Remove the four switch mounting screws and spacers. Switch is now free for removal.
c. Install. Mount switch on instrument panel base. Install four screws and spacers. Connect wires ([fig. 73]). Connect battery negative ground wire to frame. Turn switch on. Check lights and horn, tactical situation permitting. Install instrument panel cover (par. [119]).
RA PD 310270
Figure 78—Wiring Cables, Left Side
RA PD 310271
Figure 79—Wiring Cables, Right Side