c. Install Clutch Release Bearing.
(1) Insert push rod with clutch release bearing assembly into transmission shaft hole, as far as rod will go. See that bearing is clean and well greased.
(2) Install sprocket cover. Securely tighten the four nuts.
(3) Install cap screw which secures rear chain guard end and chain oiler pipe clamp to sprocket cover.
(4) Engage clutch control cable end in slotted end of clutch release lever.
(5) Check clutch release lever for free play at end of cable.
Section XIV
TRANSMISSION
| Paragraph | |
|---|---|
| Description | [53] |
| Control linkage | [54] |
| Replacement of foot starter crank | [55] |
| Replacement of starter crank spring | [56] |
| Remove transmission | [57] |
| Install transmission | [58] |