(2) With the blade of a screwdriver or with pliers, pry hooked end of spring off stud. NOTE: If spring is broken, this operation will not be necessary. Pull on spring end, at same time prying spring free of sprocket cover so as to pull spring off square shaft.
c. Install.
(1) Turn squared shaft so that clamp bolt notch is in bottom position. Engage square hole in spring on shaft with the hooked spring end to rear, in line with starter spring stud. Work spring onto shaft, prying it to rear to clear sprocket cover. Press all the way on squared shaft.
RA PD 315720
Figure 33—Removing Starter Crank Spring
(2) Hook end of spring in place on spring stud.
(3) Install foot starter crank (par. [55]).
57. REMOVE TRANSMISSION (figs. [34] and [35]).
a. Transmission and clutch are assembled in one unit and must be removed and installed together. To make sure trouble is in transmission, check clutch adjustment (par. [48]) and transmission control linkage (par. [54]) before replacing a faulty unit.