THE SPOKE SHAVE.
This is a very useful tool. It is employed for smoothing the edges of round pieces, or other ends requiring to be shaved down. It is a narrow plane made of boxwood, and has generally a steel blade let into it to cut; it is used by taking hold of each end with a hand, and moving it to and fro over the wood to be shaved down.
STOCK AND BITS.
There are about thirty-six bits to a set, all of different shapes and sizes; but our young friends need not get quite so many: if they provide themselves with a couple of a medium size, this will be sufficient, such as the centre bit and the auger bit. The centre bit will cut holes varying from a quarter of an inch to three quarters of an inch in diameter, and is used by pressing the knob end against the chest, and twirling the centre part round with the hand. It cuts a hole very clean, leaving it quite smooth inside. The auger bit is for the same purpose, and is used in the same manner. Another bit, called the taper shell bit, is used for making holes wider, and is a very useful implement.
HOW TO MAKE A WHEELBARROW.
