4. See that all oil holes are properly closed and that carriages are ready for immediate use.
5. Clean and oil without dismounting; rear sight, quadrant and fuze setter.
6. Lock all boxes and chests.
7. Signal detail: clean all instruments, oil all exposed bearing surfaces. Test telephones and go over all wire used that day and repair same by covering exposed parts. Have all instruments, wire etc., ready for immediate use.
8. Clean all collars and bits and dry the blankets; wipe dirt from the harness.
9. Clean and oil all pistols and revolvers that have been used that day.
Weekly.
1. Wash and clean entire carriage.
2. Disassemble and clear all oil breech mechanism. Always do so immediately after firing.
3. Clean out and fill with oil, all oil holes of gun clips and cradle pintle.