FORM III
(See General Conditions)
126. Front-Entrance Doors.—Provide for the front-entrance doors, cylinder, mortise, front-door lock and three 5" × 5" loose-pin, ball-tip butts for each door; also flush extension bolts 12 inches and 24 inches long.
127. Vestibule Doors.—Provide for the vestibule doors, cylinder, vestibule latch, keyed similar to the front door, and three 5" × 5" loose-pin, ball-tip butts; also flush bolts, the same as specified for entrance doors.
128. Side-Entrance and Rear Doors.—Provide for the side-entrance and rear doors, locks and butts the same as specified for the front-entrance doors. Exterior basement and kitchen doors to have 5-inch, three-bolt or 4¼-inch, three-tumbler lock and mortise bolt; also three 4½" × 4½" butts for each door.
129. Sliding-Doors.—Provide for all sliding-doors, Coburn trolley hangers; double doors to have locks with astragal fronts, and single doors to have flat-front locks.
130. Double-Acting Doors.—Provide for the doors where indicated double-acting in the plans, Bommer spring hinges or floor pivots of suitable size; also push plates, door holders, dead lock, and kick plates.
131. Miscellaneous Doors.—Provide for all other doors on first floor, 4¼-inch mortise lock with metal knobs and combined escutcheons; also three 4" × 4" loose-pin, ball-tipped butts for each door.
132. Doors on Second Floor.—Provide for all the doors on the second floor, 4¼-inch mortise locks with metal knobs and combined escutcheons; chamber-entrance and bathroom doors to have in addition a mortise bolt. Also provide for these doors, three 4" × 4" loose-pin, ball-tipped butts for each door.
133. Doors in Attic and Basement.—Provide for the doors in attic and basement, 3½-inch mortise locks, pottery knobs, and escutcheons; also two 3½" × 3½" butts for each door.