VI.—Nitrate of copper360 grains
Nitrate of silver  7 ounces
Distilled water 60 ounces
Water of ammonia, a sufficiency.

Dissolve the salts in the water and add the water of ammonia carefully until the precipitate is all redissolved. This solution, properly applied, is said to produce a very black color; a lighter shade is secured by diluting the solution. Copper sulphate may be used instead of the nitrate.

Brown Hair Dyes.—A large excess of ammonia tends to produce a brownish dye. Various shades of brown may be produced by increasing the amount of water in the silver solution. It should be remembered that the hair must, previously to treatment, be washed with warm water containing sodium carbonate, well rinsed with clear water, and dried.

I.—Silver nitrate480 grains
Copper nitrate 90 grains
Distilled water  8 fluidounces
Ammonia water, sufficient.

Dissolve the two salts in the distilled water and add the ammonia water until the liquid becomes a clear fluid.

In using apply to the hair carefully {391} with a tooth-brush, after thoroughly cleansing the hair, and expose the latter to the rays of the sun.

II.—Silver nitrate 30 parts
Copper sulphate, crystals 20 parts
Citric acid 20 parts
Distilled water950 parts
Ammonia water, quantity sufficient to dissolve the precipitate first formed.

Various shades of brown may be produced by properly diluting the solution before it be applied.

Bismuth subnitrate200 grains
Water  2 fluidounces
Nitric acid, sufficient to dissolve, or about420 grains

Use heat to effect solution. Also: