As one application, we require the knowledge of the methods of surveying for content (arpentage), differing somewhat from the method of triangulation, used in the surveying for plans (lever des plans). To make this application more fruitful, the ground should be bounded on one side by an irregular curve. The pupils will not only thus learn how to overcome this practical difficulty, but they will find, in the calculation of the surface by means of trapezoids, the first application of the method of quadratures, with which it is important that they should very early become familiar. This application will constitute a new sheet of drawing and calculations to be presented at the examination.
Most of our remarks on plane geometry apply to geometry of three dimensions. Care should be taken always to leave homogeneity apparent and to make numerous applications to the measurement of volumes.
The theory of similar polyhedrons often gives rise in the examination of the students to serious difficulties on their part. These difficulties belong rather to the form than to the substance, and to the manner in which each individual mind seizes relations of position; relations always easier to feel than to express. The examiners should be content with arriving at the results enunciated in our programme, by the shortest and easiest road.
The simplicity desired cannot however be attained unless all have a common starting-point, in the definition of similar polyhedrons. The best course is assuredly to consider that theory in the point of view in which it is employed in the arts, especially in sculpture; i.e. to conceive the given system of points, M, N, P, . . . . to have lines passing from them through a point S, the pole of similitude, and prolonged beyond it to M’, N’, P’, . . . . so that SM’, SN’, SP’, . . . . are proportional to SM, SN, SP, . . . . . Then the points M’, N’, P’, . . . . form a system similar to M, N, P, . . . . .
The areas and volumes of the cylinder, of the cone, and of the sphere must be deduced from the areas and from the volumes of the prism, of the pyramid, and of the polygonal sector, with the same simplicity which we have required for the measure of the surface of the circle, and for the same reasons. It is, besides, the only means of easily extending to cones and cylinders with any bases whatever, right or oblique, those properties of cones and cylinders,—right and with circular bases,—which are applicable to them.
Numerical examples of the calculations, by logarithms, of these areas and volumes, including the area of a spherical triangle, will make another sheet to be presented to the examiners.
PROGRAMME OF GEOMETRY.
1. OF PLANE FIGURES.
Measure of the distance of two points.—Two finite right lines being given, to find their common measure, or at least their approximate ratio.
Of angles.—Right, acute, obtuse angles.—Angles vertically opposite are equal.