Repairing Table Linen.

Fig. 1.
Plain Darning.

Fig. 2.
Twill Darning.

Fig. 3. Darning
for a Straight
Tear or Gash.

Now more than ever is it absolutely necessary to preserve our linen household napery, for the price asked for new linen is enormous, owing to its scarcity, and it is said that in the near future it will be almost impossible to obtain it at any price.

It may not be generally known that linen is liable to the attack of minute insects, which bore through it, just as the moth does through wood, and so weaken it that it soon wears into holes, if precaution is not taken to prevent them. When storing linen, camphor, lavender, cedar wood, etc., are just as necessary for its preservation as they are for woollen goods, and it is said that an apple, hung up till quite dry, then studded all over with cloves, stuck in up to the head, is very potent when attached to the top of the drawer of the chest, or hung on the inside of the door, if the chest be made in this way. All linen should be well aired before putting away. The repairs should be made before sending the linen to the laundry, and if it has been stiffened and glazed, the part requiring mending should be steeped in warm water to take out the starch, and then dried.

When a part becomes threadbare, the best method of repairing is to darn it neatly with fine linen thread, obtained by ravelling a piece of the material. In the case of a table cloth this thread can be got by ripping the hem at one end and unravelling the edge for a few rows. Wind the thread on a reel and keep for the repairing of this cloth, then remake the hem.

Fig. 1 shows the method of doing plain darning, and Fig. 2 shows the twill darning or plain damask stitch.

Insert the part to be darned in the embroidery tambour with the wrong side turned towards you, as all darning must be done on this side of the material. The darning should go well up into the sound part of the surrounding material, and the stitches should be small and even.

Repairing Table Linen.

Run in the lengthwise stitches first, taking care to have them a little loose, as they will shrink when washed, and leave a small loop of the thread at each turning, to allow for the taking up of these threads when working across them. Run the stitches according to the thread of the material in perfectly straight lines, taking up only two or three threads and skipping the same number. In alternate rows take up those threads skipped in the preceding rows.