Showing the front of the Chest Protector.
For Men’s Waistcoats.
Many men complain that they feel cold at their back, even though they are wearing the thickest of vests. This is probably due to the fact that the material used in making the back of the waistcoat is many degrees thinner than that used for the fronts. The defect can be easily remedied, however, if you have three or four old pairs of gloves.
Cut out a piece of stout black lining, the size of the back piece of the waistcoat. Stitch the portions of the gloves to the wrong side of this lining. They will not need to come below the strap at the waist-line. Then turn in the edges, and apply this to the inside of the waistcoat (glove pieces inside of course), and run it neatly all round, taking care that it does not show above the top of the waistcoat at the back. It will keep it better in place if you run a line of stitching down the centre of the back, from top to bottom, after the lining has been run on all round.
You will have a perfectly neat looking garment that simply looks like a waistcoat with black lining at the back.
I advise this lining being put on by hand rather than by machine.