"The favorable accounts of the operation of this implement in several of the Western States, induced the board to invite Mr. Hussey to bring it to Maryland, and submit it to their inspection. It was accordingly exhibited in Oxford, Talbot county, on the first of July, in presence of the board, and a considerable number of other gentlemen. Its performance may justly be denominated perfect, as it cuts every spear of grain, collects it in bunches of the proper size for sheaves, and lays it straight and even for the binders. On the 12th of July a public exhibition was made at Easton, under the direction of the board; several hundred persons, principally farmers, assembled to witness it, and expressed themselves highly satisfied with the result. At the Trappe, where it was shown by the inventor on the following Saturday, an equal degree of approbation was evinced. It was afterwards used on the farm of Mr. Tench Tilghman, where 180 acres of wheat, oats, and barley were cut with it. Three mules of medium size worked in it constantly, with as much ease as in a drag harrow. They moved with equal facility in a walk or a trot. A concise description of this simple implement will show that it is admirably adapted to the important purpose for which it was invented. Resting on two wheels, which are permanently attached to the machine, and impart the motion to the whole, the main body of the machine is drawn by the horses along the outer edge of the standing grain. As the horses travel outside of the grain, it is neither knocked down or tangled in the slightest degree. Behind the wheels is a platform (supported by a roller or wheel), which projects beyond the side of the machine five feet into the grain. On the front of the edge projecting part of the platform is the cutter. This is composed of twenty-one teeth, resembling large lancet blades, which are placed side by side, and firmly riveted to a rod of iron. A lateral motion is imparted to it by a crank, causing it to vibrate between two rows of iron spikes, which point forward. As the machine advances, the grain is cut and falls backwards on the platform, where it collects in a pile. A man is placed on the part of the platform directly behind the horses, and with a rake of peculiar construction pushes off the grain in separate bunches, each bunch making a sheaf. It may appear to some that the grain will accumulate too rapidly for this man to perform his duty. But, upon considering the difference between the space occupied by the grain when standing, and when lying in a pile after it is cut, it will be evident that the raker has ample time to push off the bunches even in the thickest grain. In thin grain he has to wait until sufficient has collected to form a sheaf.
"The machine is driven around the grain, which may be sown either on a smooth surface or on corn ridges. For the first round a way may be cleared with a cradle; but this is deemed unnecessary, for the grain, when driven over, is left in an inclined position, and by cutting it in the opposite direction as much of it is saved as with a cradle. Fourteen acres in corn lands were cut between 10 A. M. and 7½ P. M. The hands had never worked with the machine before, nor was it a trial day's work; for, owing to the shortness of the straw, the machine was not allowed to cut when passing over the ridges from one side of the ground to the other, and this time was consequently lost. From the principle on which the cutting is performed, a keen edge to the cutter is by no means essential. The toughest weeds, an occasional corn stalk, or a stick of the thickness of a man's little finger, have been frequently cut without at all affecting its operation; it can be sharpened, however, in a few minutes with a file. The width of the swath may be increased by having the cutter made longer, and the same machine will cut a stubble of several different heights.
Mr. Hussey Awarded Silver Cups
"There is ample room to make the different parts of any size, though the strength of every part has been fully tested. The machine has been often choked by oyster-shells getting into the cutter, in attempting to cut too low a stubble. The motion of the machinery being checked, the main wheels slide on the ground; the strain on every part being equal to the power exerted by the horses. It can be managed by any intelligent, careful negro. We deem it a simple, strong, and effective machine, and take much pleasure in awarding unanimously the meritorious inventor of it a handsome pair of silver cups.
"ROBERT H. GOLDSBOROUGH,
SAMUEL STEVENS,
SAMUEL T. KENNARD,
ROBERT BANNING,
SAMUEL HAMBLETON, Senr.,
NICHOLAS GOLDSBOROUGH,
EDWARD N. HAMBLETON,
JAMES LI. CHAMBERLAIN,
MARTIN GOLDSBOROUGH,
HORATIO L. EDMONSON,
TENCH TILGHMAN."
Mr. Lane goes on to say that one of the machines was taken to La Porte, Indiana, and there put to work. Another was sent to Illinois.
"The turning and fitting for these machines was done at the mill of Henry Rogers, about 500 yards away from the little shop. In the following copy of a recent affidavit sent us, date not given, these last matters are sufficiently substantiated."
Mr. Lane continues:
The True Inventor
"Who invented the Reaper? The full, honest answer is that Obed Hussey invented the Reaper.