James Ten Eyck used an open reel; not only to gather the grain, but his cutters or shears, were attached to, and revolved with the reel;—very much, if not exactly on the principle of shearing cloth.
William Manning used another form of cutters, and quite different from James Ten Eyck's—he likewise used fingers or teeth to support the grain during the action of the horizontal cutters.
William and Thomas Schnebly of Maryland also used the reel, with shears as cutters, very similar to Bell's.
Abraham Randall, or Rundell, of New York (for the name is spelled both ways), was another of the early inventors. His patent of 1835 is not restored, though it is stated his machine was experimented with as early as 1833 or 1834. He also used the reel, and his cutters, it is said, were similar to Bell's—using shears.
None Successful
T. D. Burrall, of New York, was also one of the early inventors, about 1832 or 1833, but we believe professedly after Bell's, so far as to use a reel and shears.
Hussey's Machine an American Triumph
None of these machines, however, Hussey's excepted, were successful, or were used any length of time; nor is it necessary here to refer particularly to other attempts, about this time, or indeed prior to this period, for they were equally unsuccessful; and their inventors cannot claim the merit of doing a thing, that was not in fact performed—making an efficient and successful Reaper. We may here remark, however, that so far as now known, no machine like Bell's, on the shear or scissor principle, has succeeded in this country; or as we believe, is ever likely to succeed. We have seen a number by different inventors, and all have failed to give satisfaction. They may work well for a very brief period and with keen edges; but as they become dull, the shears are forced apart by the straw and grass—particularly the latter, and the machine fails, as it inevitably must do, in its allotted duty, and for very obvious reasons. If the shear rivet or bolt is kept tight there is too much friction; if loose enough to play freely it is too loose to cut well; and, lastly, it is too liable to wear at the most important point of the whole machine. During the harvest of 1853 in England every effort was made to uphold Bell's machine; in some cases prizes were awarded to it, though evidently partial; for in the face of these awards some who witnessed the trials, and had used Bell's machines, laid them aside and purchased Hussey's. At the close of the season, as we learn from reliable authority, even the engineers who operated Bell's, frankly admitted that the American machine as exhibited by Hussey, was the better implement, owing to the arrangement of the guards and knives; Bell's required so much tinkering, that several machines were required to cope with one of Hussey's. At the recent harvest (1854) the Mark Lane Express acknowledges that the Royal Agricultural Societies' show at Lincoln, Bell's machine was "at last fairly beaten" by Hussey's, including McCormick's, and Hussey's machine received the prize over all others. It is just, however, to add, that far as we consider Bell's machine behind some of the present day, yet complex and cumbersome as it was, it combined more of the essential features of success than any Reaper that preceded it.
Bronze medal won by Mr. Hussey with the Reaper at New York in 1853.