While traveling through the country as a watchmaker I found it quite convenient to keep my small drills, taps, small brooches, etc., In boxes having a sliding cover. To keep the contents from spilling or getting mixed in my case I used a small fastener as shown in the accompanying illustration, The fastener is made of steel or brass and fastened by means of small screws or tacks on the outside of the box. A hole is drilled on the upper part to receive the pin that is driven into the sliding cover. This pin should not stick out beyond the thickness of the spring, which is bent up at the point so the pin will freely pass under it. The pin can be driven through the cover to prevent it from being pulled entirely out of the box.
Contributed by Herm Grabemann, Milwaukee, Wis.
How to Chain a Dog
The Dog Has Plenty of Room for Exercise
A good way to chain a dog and give him plenty of ground for exercise is to stretch a clothesline or a galvanized wire between the house and barn on which is placed a ring large enough to slide freely. The chain from the dog's collar is fastened to the ring. This method can also be used for tethering a cow or horse, the advantage being the use of a short tie rope eliminating the possibility of the animal becoming entangled.