Fig. 16.
FRACTURE OF BOTH BONES IN FOREARM (Scudder).
This cut shows the position and length of the two padded splints; also method of applying adhesive plaster.
After the forearm is set, it should be held steadily in the following position while the splints are applied. The elbow is bent so that the forearm is held at right angles with the arm horizontally across the front of the chest with the hand extended, open palm toward the body and thumb uppermost. The splints, two in number, are made of wood about one-quarter inch thick, and one-quarter inch wider than the forearm. They should be long enough to reach from about two inches below the elbow to the root of the fingers. They are covered smoothly with cotton wadding, cotton wool, or other soft material, and then with a bandage. The splints are applied to the forearm in the positions described, one to the back of the hand and forearm, and the other to the palm of the hand and front of the forearm.
Usually there are spaces in the palm of the hand and front of the wrist requiring to be filled with extra padding in addition to that on the splint. The splints are bound together and to the forearm by three strips of surgeon's adhesive plaster or bandage, about two inches wide. One strip is wound about the upper ends of the splints, one is wrapped about them above the wrist, and the third surrounds the back of the hand and palm, binding the splints together below the thumb. The splints should be held firmly in place, but great care should be exercised to use no more force in applying the adhesive plaster or bandage than is necessary to accomplish this end, as it is easy to stop the circulation by pressure in this part. There should be some spring felt when the splints are pressed together after their application. A bandage is to be applied over the splints and strips of plaster, beginning at the wrist and covering the forearm to the elbow, using the same care not to put the bandage on too firmly. The forearm is then to be held in the same position by a wide sling, as shown above. (See Figs. [15], [16], [17].)
Fig. 17.