2nd round: Ch., 9, miss 2, plain 1; repeat round; you should have 7 lots of the 9 chain in the round.
3rd: d.c. in each loop all round, which completes the round; you now require 14 of the following:—
PATTERN FOR LEAF.—Make a ch. of 12 loops, turn back, and work the 12 loops d.c.
2nd round: Ch. 3, miss 2, work two treble in 1 loop, repeat to the end, and in the end loop ch. 3, work 2 treble, work the other side the same, with the treble opposite, the treble and 3 ch. at the end, plain 1 in the end loop, fasten off.
3rd: Plain 1 in the centre of the first 3 ch. of last round, ch. 3, work 1 treble at the top of the first treble of last round, ch. 2, work 1 treble at the top of the next treble of last round; you repeat all round the leaf with 3 ch., opposite the 3 ch. of last round, and 2 treble at the top of the 2 treble of last round, with 2 ch. between them, working both sides to correspond, turn back.
4th: Ch. 4 and plain 1 in each lot of the chain of last round, fasten off, which completes the leaf; you then work a stalk to each leaf as follows: ch. 5, work 1 treble in the centre of the chain round between the edge and the centre, work 1 treble on the other side, the same turn back, and work the 5 chains plain, fasten off, which completes the stalk; after working the number of each portion required and joining them together, as shown in the illustration, you work a band for the neck-part of the collar as follows:—
Work a few plain at the end, then ch. 10, and work 1 treble where it requires a treble, and a double where it requires a double, and a plain in the centre of the stalks and rounds as you see the stitches in the engraving, so as to make it lie to the shape of the neck.
2nd row: Ch. 2, miss 2, work 1 treble, repeat to the end, turn back.
3rd: Ch. 2, work 1 treble at the top of the treble of last row, repeat to the end, turn back.