In the chronograph of Marcel Deprez, a cylinder for receiving records is driven at a high velocity, 4 to 5 metres per second surface velocity. The velocity is determined by means of an Deprez. electrically-driven tuning-fork, the traces being read by means of a vernier gauge. A mercury speed indicator of the Ramsbottom type enables the rotation to be continuously controlled (A. Favarger, L’Électricité et ses applications à la chronométrie).
Astronomical Chronographs.—The astronomical chronograph is an instrument whereby an observer is enabled to register the time of transit of a star on a sheet of paper attached to a revolving cylinder. A metal cylinder covered with a sheet of Dent. paper is rotated by clockwork controlled by a conical pendulum, or by a centrifugal clock governor such as is used for driving a telescope. By means of a screw longer than the cylinder, mounted parallel with the axis of the cylinder and rotated by the clockwork, a carriage is made to traverse close to the paper. In some instruments this carriage is furnished with a metal point, and in others with a stylographic ink pen. The point or pen is made to touch the paper by an electromagnet, the electric current of which is closed by the observer at the transit instrument, and a mark is recorded on the revolving cylinder. The movement of the same point or pen is also controlled by a standard clock, so that at the end of each second a mark is made. The cylinder makes one revolution per minute, and the minute is indicated by the omission of the mark. In E.J. Dent’s form (Nature, 23, p. 59) continuous observations can be recorded for 62⁄3 hours. The conical pendulum used to govern the rotation of the cylinder was the invention of Sir G.B. Airy. The lower end is geared to a metal plate which sweeps through an annular trough filled with glycerin and water. When the path of the pendulum exceeds a certain diameter it causes the plate to enter the liquid more deeply, its motion being thereby checked; also, when the pendulum moves in a smaller circle the plate is lifted out of the liquid and the resistance is diminished in the same proportion as the force. The compensatory action is considerable; doubling the driving power produces no perceptible difference in the time. To prevent the injury of the conical pendulum and the wheel work by any sudden check of the cylinder, a ratch-wheel connexion is placed between the cylinder and the train of wheel work; this enables the pendulum to run on until it gradually comes to rest. The pendulum, which weighs about 18 ℔, is compensated, and makes one revolution in two seconds; it is suspended from a bracket by means of two flexible steel springs placed at right angles to one another.
The observatory of Washburn, University of Wisconsin, is furnished with a chronograph of the same type as that of Dent (Annals Harvard Coll. Obs. vol. i. pt. ii. p. 34), but in this instrument the rotation of the cylinder is controlled by a double conical pendulum governor of peculiar construction. When the balls fly out beyond a certain point, one of them engages with a hook attached to a brass cylinder which embraces the vertical axle loosely. When this mass is pulled aside the work done on it diminishes the speed of the governor. The pendulum ball usually strikes the hook from 60 to 70 times per minute. Governors on this principle were adopted by Alvan Clark for driving heliostats in the United States Transit of Venus Expedition, 1874.
In the astronomical chronograph designed by Sir Howard Grubb (Proc. Inst. Mech. Eng., July 1888), the recording cylinders—two in number—are driven by a weight acting on a train of wheel work controlled by an astronomical telescope governor. Grubb. The peculiar feature of this instrument is that the axle is geared to a shaft which communicates motion to the cylinders through a mechanism whereby the speed of rotation is constantly corrected by a standard clock. Should the rotation fall below the correct speed it is automatically accelerated, and if its speed of rotation rises above the correct one it is retarded. The accelerator and retarder are thrown into action by electromagnets, controlled by a “detector” mounted on the same shaft. The rather complicated mechanism employed to effect the correction is described and fully illustrated in the reference given. The cylinders are covered with paper, but all the markings are made with a stylographic pen. The marks indicating seconds are dots, but those made by the observer are short lines. When an observation is about to be made the observer first notes the hour and minute, and, by pressing a contact key attached to a flexible cord at the transit instrument, marks the paper with a letter in Morse telegraph characters, indicating the hour and minute; he then waits till a micrometer wire cuts a star and at the instant closes the circuit, so that the second and fraction of a second are registered on the chronograph paper. When a set of observations have been taken, the paper is removed from the cylinder, and the same results are obtained by applying a suitably divided rule to the marked paper, fractions of a second being estimated by applying a piece of glass ruled with eleven straight lines converging to a point. The ends of these lines on the base of the triangle so formed are equidistant on one edge of the glass, so that when the first and last lines are so placed as to coincide with the beginning and end of the markings of a second, that second is divided into ten equal parts. The base of the triangle is always kept parallel with the line of dots. The papers, after they have been examined and the results registered, are kept for reference.
In the astronomical chronograph of Hipp, used in determining longitudes, the movement of a recording cylinder is regulated by Hipp. means of a toothed wheel, the last of a clockwork train, controlled by a vibrating metal tongue; this important feature is described in detail in Favarger’s work cited above.
Acoustic Chronographs.—In the chronograph devised by H.V. Regnault (Acad. des Sc., 1868) to determine the velocity of sound propagated through a great length of pipe, a band of paper 27 mm. wide was continuously unrolled from a bobbin by means of an electromagnetic engine. In its passage over a Regnault. pulley it passed over a smoky lamp flame, which covered it with a thin deposit of carbon. It next passed over a cylinder in contact with the style of a tuning-fork kept in vibration by electromagnets placed on either side of its prongs, the current being interrupted by the fork; it was also in contact with an electric signal controlled by a standard clock. Also an electromagnetic signal marked the beginning and end of a time period. Thus three markings were registered on the band, viz. the time of the pendulum, the vibrations of the fork, and the marking of the signal due to the opening and closing of the current by electrical contacts attached to diaphragms on which the sound wave acted. The contacts consisted of minute hammers resting on metal points fixed to the centre of diaphragms which closed the end of the experimental pipes. The signal marked the instant at which a sound wave impinged on a diaphragm. The markings on the paper band gave the period of time between two events, and the number of vibrations of the tuning-fork per second was estimated by means of markings due to the clock. The sound wave was usually originated by firing a pistol into the pipe furnished with diaphragms and contact pieces.
In the chronographic use of the Morse telegraph instrument (Stewart and Gee, Elementary Practical Phys. p. 234) a circuit is arranged which includes a seconds’ pendulum furnished with a fine platinum wire below the bob, which sweeps Ayrton and Perry. through a small mass of mercury forming a part of the circuit. There is a Morse key for closing the circuit. A fast-running Morse instrument and a battery are placed across this circuit as a shunt. A succession of dots is made on the paper ribbon by the circuit being closed by the pendulum, and the space between each adjacent dot indicates a period of one second’s duration. Also, when the key is depressed, a mark is made on the paper. To measure a period of time, the key is depressed at the beginning and end of the period, causing two dots to be made on the ribbon; the interval between these, when measured by the intervals due to the pendulum, gives the length of the period in seconds, and also in fractions of a second, when the seconds’ interval is subdivided into convenient equal parts. This apparatus has been used in determination of the velocity of sound. In the break circuit arrangement of pendulum key and Morse instrument the markings appear as breaks in a line which would otherwise be continuous. This combination was employed by Professors W.E. Ayrton and J. Perry in their determination of the acceleration of gravity at Tokio, 1877-1878 (Proc. Phys. Soc. Lond. 3, p. 268).
In the tuning-fork electro-chronograph attributed to Hipp a metal cylinder covered with smoked glazed paper is rotated uniformly by clockwork, a tuning-fork armed with a metallic style being so adjusted that it makes a clear fine line on the Hipp. smoked paper. The tuning-fork is placed in the secondary circuit of an induction coil, so that when the primary circuit is broken an induced spark removes a speck of black from the paper and leaves a mark. The time period is deduced by counting the number of vibrations and fractions of vibration of the tuning-fork as recorded by a sinuous line on the cylinder. In later forms of this instrument the cylinder advances as it rotates, and a spiral line is traced. To obtain good results the spark must be very small, for when large it often leaps laterally from the end of the style, and does not give the true position of the style when the circuit is broken. The same arrangement of tuning-fork and revolving cylinder, with the addition of a standard clock, has been used by A.M. Mayer (Trans. Mayer. Nat. Acad. Sci. U.S.A. vol. iii.) and others for calibrating tuning-forks, and comparing their vibrations directly with the beats of the pendulum of a standard clock the rate of which is known. The pendulum marks and breaks the primary circuit by carrying a small platinum wire through a small mercury meniscus. Better and apparently certain contacts can be obtained from platinum contact-pieces, brought together above the pendulum by means of a toothed wheel on the scape-wheel arbor. Sparking at the contact points is greatly reduced by placing a couple of lead plates in dilute sulphuric acid as a shunt across the battery circuit.
For Physiological Purposes.—A. Fick’s pendulum myograph or muscle-trace recorder is described in Vierteljahrsschr. der naturforsch. Ges. in Zürich, 1862, S. 307, and in Text-book of Physiology, M. Foster, pp. 42, 45. It was used to obtain a record Fick. of the contraction of a muscle when stimulated. In many respects the instrument is similar to the electro-ballistic chronograph of Navez. A long pendulum, consisting of a braced metal frame, carries at its lower end a sheet of smoked glass. The pendulum swings about an axis supported by a wall bracket. Previous to an experiment, the pendulum is held on one side of its lowest position by a spring catch; when this is depressed it is free to swing. At the end of its swing it engages with another spring catch. In front of the moving glass plate a tuning-fork is fixed, also a lever actuated by the muscle to be electrically stimulated. When the pendulum swings through its arc, it knocks over the contact key in the primary circuit of an induction coil, the secondary of which is in connexion with the muscle. The smoked plate receives the traces of the style of the tuning-fork and of the lever attached to the muscle, and also the trace of an electromagnetic signal which marks the instant at which the primary circuit is broken. After the traces are made, they are ruled through with radial lines, cutting the three traces, and the time intervals between different parts of the muscle curve are measured in terms of the period of vibration of the tuning-fork, as in other chronographs in which the tuning-fork is employed.
In the spring myograph of E. Du Bois Reymond (Munk’s Physiologie des Menschen, p. 398) a smoked glass plate attached to a metal rod is shot by a spiral spring along two guides with a Du Bois Reymond. velocity which is not uniform. The traces of a style moved by the muscle under examination, and of a tuning-fork, are recorded on the glass plate, the shooter during its traverse knocking over one or more electric keys, which break the primary circuit of an induction coil, the induced current stimulating the muscle.