Matthew Walker (figs. 26, 27).—Unlay the end of a rope. Take the first strand round the rope and through its own bight; the second strand round the rope, through the bight of the first, and through its own bight; the third through all three bights. Haul the ends taut.
| Fig. 25. | Fig. 26. | Fig. 27. | Fig. 28. |
Inside Clinch (fig. 28).—The end is bent close round the standing part till it forms a circle and a half, when it is securely seized at a, b and c, thus making a running eye; when taut round anything it jams the end. It is used for securing hemp cables to anchors, the standing parts of topsail sheets, and for many other purposes. If the eye were formed outside the bight an outside clinch would be made, depending entirely on the seizings, but more ready for slipping.
Midshipman’s Hitch (fig. 29).—Take two round turns inside the bight, the same as a half-hitch repeated; stop up the end or let another half-hitch be taken or held by hand. Used for hooking a tackle for a temporary purpose.
| Fig. 29. | Fig. 30. | Fig. 31. | Fig. 32. |
Turk’s Head (fig. 30).—With fine line (very dry) make a clove hitch round the rope; cross the bights twice, passing an end the reverse way (up or down) each time; then keeping the whole spread flat, let each end follow its own part round and round till it is too tight to receive any more. Used as an ornament variously on side-ropes and foot-ropes of jibbooms. It may also be made with three ends, two formed by the same piece of line secured through the rope and one single piece. Form with them a diamond knot; then each end crossed over its neighbour follows its own part as above.
Spanish Windlass (fig. 31).—An iron bar and two marling-spikes are taken; two parts of a seizing are twisted like a cat’s-paw (fig. 16), passed round the bar, and hove round till sufficiently taut. In heaving shrouds together to form an eye two round turns are taken with a strand and the two ends hove upon. When a lever is placed between the parts of a long lashing or frapping and hove round, we have what is also called a Spanish windlass.
Slings (fig. 32).—This is simply the bight of a rope turned up over its own part; it is frequently made of chain, when a shackle (bow up) takes the place of the bight at s and another at y, connecting the two ends with the part which goes round the mast-head. Used to sling lower yards. For boat’s yards it should be a grummet with a thimble seized in at y. As the tendency of all yards is to cant forward with the weight of the sail, the part marked by an arrow should be the fore-side—easily illustrated by a round ruler and a piece of twine.
Sprit-Sail Sheet Knot (fig. 33).—This knot consists of a double wall and double crown made by the two ends, consequently with six strands, with the ends turned down. Used formerly in the clews of sails, now as an excellent stopper, a lashing or shackle being placed at s and a lanyard round the head at l.
| Fig. 33. | Fig. 34. | Fig. 35. |