Oil-gas Beacons.—In 1881 a beacon automatically lighted by Pintsch’s compressed oil gas was erected on the river Clyde, and large numbers of these structures have since been installed in all parts of the world. The gas is contained in an iron or steel reservoir placed within the beacon structure, refilled by means of a flexible hose on the occasions of the periodical visits of the tender. The beacons, which remain illuminated for periods up to three months are charged to 7 atmospheres. Many lights are provided with occulting apparatus actuated by the gas passing from the reservoir to the burner automatically cutting off and turning on the supply. The Garvel beacon (1899) on the Clyde is shown in fig. 46. The burner has 7 jets, and the light is occulting. Since 1907 incandescent mantle burners for oil gas have been largely used for beacon illumination, both for fixed and occulting lights.

Acetylene has also been used for the illumination of beacons and other unattended lights.

Lindberg Lights.—In 1881-1882 several beacons lighted automatically by volatile petroleum spirit on the Lindberg-Lyth and Lindberg-Trotter systems were established in Sweden. Many lights of this type have subsequently been placed in different parts of the world. The volatile spirit lamp burns day and night. Occultations are produced by a screen or series of screens rotated round the light by the ascending current of heated air and gases from the lamp acting upon a horizontal fan. The speed of rotation of the fan cannot be accurately adjusted, and the times of occultation therefore are liable to slight variation. The lights run unattended for periods up to twenty-one days.

Benson-Lee Lamps.—An improvement upon the foregoing is the Benson-Lee lamp, in which a similar occulting arrangement is often used, but the illuminant is paraffin consumed in a special burner having carbon-tipped wicks which require no trimming. The flame intensity of the light is greater than that of the burner consuming light spirit. The introduction of paraffin also avoids the danger attending the use of the more volatile spirit. Many of these lights are in use on the Scottish coast. They are also used in other parts of the United Kingdom, and in the United States, Canada and other countries.

Permanent Wick Lights.—About 1891 the French Lighthouse Service introduced petroleum lamps consuming ordinary high-flash lighthouse oil, and burning without attention for periods of several months. The burners are of special construction, provided with a very thick wick which is in the first instance treated in such a manner as to cause the formation of a deposit of carbonized tar on its exposed upper surface. This crust prevents further charring of the wick after ignition, the oil becoming vaporized from the under side of the crust. Many fixed, occulting and flashing lights fitted with these burners are established in France and other countries. In the case of the occulting types a revolving screen is placed around the burner and carried upon a miniature mercury float. The rotation is effected by means of a small Gramme motor on a vertical axis, fitted with a speed governor, and supplied with current from a battery of primary cells. The oil reservoir is placed in the upper part of the lantern and connected with the burner by a tube, to which is fitted a constant level regulator for maintaining the burning level of the oil at a fixed height. In the flashing or revolving light types the arrangement is generally similar, the lenses being revolved upon a mercury float which is rotated by the electric motor. The flashing apparatus established at St Marcouf in 1901 has a beam intensity of 1000 candle-power, and is capable of running unattended for three months. The electric current employed for rotating the apparatus is supplied by four Lalande and Chaperon primary cells, coupled in series, each giving about 0.15 ampere at a voltage of 0.65. The power required to work the apparatus is at the maximum about 0.165 ampere at 0.75 volt, the large surplus of power which is provided for the sake of safety being absorbed by a brake or governor connected with the motor.

Wigham Beacon Lights.—Wigham introduced an oil lamp for beacon and buoy purposes consisting of a vertical container filled with ordinary mineral oil or paraffin, and carrying a roller immediately under the burner case over which a long flat wick passes. One end of the wick is attached to a float which falls in the container as the oil is consumed, automatically drawing a fresh portion of the wick over the roller. The other end of the wick is attached to a free counterweight which serves to keep it stretched. The oil burns from the convex surface of the wick as it passes over the roller, a fresh portion being constantly passed under the action of the flame. The light is capable of burning without attention for thirty days. These lights are also fitted with occulting screens on the Lindberg system. The candle-power of the flame is small.

7. Light-Vessels.—The earliest light-vessel placed in English waters was that at the Nore in 1732. The early light-ships were of small size and carried lanterns of primitive construction and small size suspended from the yard-arms. Modern light-vessels are of steel, wood or composite construction. Steel is now generally employed in new ships. The wood and composite ships are sheathed with Muntz metal. The dimensions of English light-vessels vary. The following may be taken as the usual limits:

Length80 ft. to 114 ft.
Beam20 ft. to 24 ft.
Depth moulded13 ft. to 15 ft. 6 in.
Tonnage155 to 280.

The larger vessels are employed at outside and exposed stations, the smaller ships being stationed in sheltered positions and in estuaries. The moorings usually consist of 3-ton mushroom anchors and 15⁄8 open link cables. The lanterns in common use are 8 ft. in diameter, circular in form, with glazing 4 ft. in height. They are annular in plan, surrounding the mast of the vessel upon which they are hoisted for illumination, and are lowered to the deck level during the day. Fixed lanterns mounted on hollow steel masts are now being used in many services, and are gradually displacing the older type. The first English light-vessel so equipped was constructed in 1904. Of the 87 light-vessels in British waters, including unattended light-vessels, eleven are in Ireland and six in Scotland. At the present time there are over 750 light-vessels in service throughout the world.

Until about 1895 the illuminating apparatus used in light-vessels was exclusively of catoptric form, usually consisting of 21 in. or 24 in. silvered parabolic reflectors, having 1, 2 or 3-wick mineral oil burners in focus. The reflectors and lamps are hung in gimbals to preserve the horizontal direction of the beams.