STRAIGHTENING THE BARRELS.
The above engraving represents the workman in the act of examining the interior of a barrel with a view to ascertaining whether it be straight. On the floor, in the direction toward which the barrel is pointed, is a small mirror, in which the workman sees, through the tube, a reflection of a certain pane of glass in the window. The pane in question is marked by a diagonal line, which may be seen upon it, in the view, passing from one corner to the other. This diagonal line now is reflected by the mirror into the bore of the barrel, and then it is reflected again to the eye of the observer; for the surface of the iron on the inside of the barrel is left in a most brilliantly polished condition, by the boring and the operations connected therewith. Now the workman, in some mysterious way or other, detects the slightest deviation from straightness in the barrel, by the appearance which this reflection presents to his eye, as he looks through the bore in the manner represented in the drawing. He is always ready to explain very politely to his visitor exactly how this is done, and to allow the lady to look through the tube and see for herself. All that she is able to see, however, in such cases is a very resplendent congeries of concentric rings, forming a spectacle of very dazzling brilliancy, which pleases and delights her, though the mystery of the reflected line generally remains as profound a mystery after the observation as before. This is, in fact, the result which might have been expected, since it is generally found that all demonstrations and explanations relating to the science of optics and light, addressed to the uninitiated, end in plunging them into greater darkness than ever.
The only object which the mirror upon the floor serves, in the operation, is to save the workman from the fatigue of holding up the barrel, which it would be necessary for him to do at each observation, if he were to look at the window pane directly. By having a reflecting surface at the floor he can point the barrel downward, when he wishes to look through it, and this greatly facilitates the manipulation. There is a rest, too, provided for the barrel, to support it while the operator is looking through. He plants the end of the tube in this rest, with a peculiar grace and dexterity, and then, turning it round and round, in order to bring every part of the inner surface to the test of the reflection, he accomplishes the object of his scrutiny in a moment, and then recovering the barrel, he lays it across a sort of anvil which stands by his side, and strikes a gentle blow upon it wherever a correction was found to be required. Thus the operation, though it often seems a very difficult one for the visitor to understand, proves a very easy one for the workman to perform.
OLD MODE OF STRAIGHTENING.
In former times a mode altogether different from this was adopted to test the interior rectitude of the barrel. A very slender line, formed of a hair or some similar substance, was passed through the barrel—dropped through, in fact, by means of a small weight attached to the end of it. This line was then drawn tight, and the workman looking through, turned the barrel round so as to bring the line into coincidence successively with every portion of the inner surface. If now there existed any concavity in any part of this surface, the line would show it by the distance which would there appear between the line itself and its reflection in the metal. The present method, however, which has now been in use about thirty years, is found to be far superior to the old one; so much so in fact that all the muskets manufactured before that period have since been condemned as unfit for use, on account mainly of the crookedness of the barrels. When we consider, however, that the calculation is that in ordinary engagements less than one out of every hundred of the balls that are discharged take effect; that is, that ninety-nine out of every hundred go wide of the mark for which they are intended, from causes that must be wholly independent of any want of accuracy in the aiming, it would seem to those who know little of such subjects, that to condemn muskets for deviating from perfect straightness by less than a hair, must be quite an unnecessary nicety. The truth is, however, that all concerned in the establishment at Springfield, seem to be animated by a common determination, that whatever may be the use that is ultimately to be made of their work, the instrument itself, as it comes from their hands, shall be absolutely perfect; and whoever looks at the result, as they now attain it, will admit that they carry out their determination in a very successful manner.
CINDER HOLES.
Various other improvements have been made from time to time in the mode of manufacturing and finishing the musket, which have led to the condemnation or alteration of those made before the improvements were introduced. A striking illustration of this is afforded by the case of what are called cinder holes. A cinder hole is a small cavity left in the iron at the time of the manufacture of it—the effect, doubtless, of some small development of gas forming a bubble in the substance of the iron. If the bubble is near the inner surface of the barrel when it is welded, the process of boring and finishing brings it into view, in the form of a small blemish seen in the side of the bore. At a former period in the history of the Armory, defects of this kind were not considered essential, so long as they were so small as not to weaken the barrel. It was found, however, at length that such cavities, by retaining the moisture and other products of combustion resulting from the discharge of the piece, were subject to corrosion, and gradual enlargement, so as finally to weaken the barrel in a fatal manner. It was decided therefore that the existence of cinder holes in a barrel should thenceforth be a sufficient cause for its rejection, and all the muskets manufactured before that time have since been condemned and sold; the design of the department being to retain in the public arsenals only arms of the most perfect and unexceptionable character.