New Process for Printing Gold and Silver Colors on
Carpetings and other Textiles.
(Translated for the Commercial Bulletin.)
Gold and silver designs for carpeting and oilcloths have been hitherto prepared in the following manner: The gold or silver were put in leaves or bronze powder on the designs, which were printed with a varnish of linseed oil, or similar adhesive. The bronze thus attached did not possess much firmness, and the method was necessarily expensive. The method recently adopted by Wohlforth is as follows: The bronze powder is united at once to printing material. The liquid silicate of potash, or of oxide of sodium, answers this purpose. One part, by weight, of gold, silver, or bronze powder, along with two parts of the silicate, will give a print color, which is easily transferable by rollers to paper, oilcloth, and woods and metals. The bronze thus printed dries very rapidly, and cannot be taken off by oil or water, unless they are boiling. It bears light and heat equally well, and especially sulphureted hydrogen, which has such a destructive effect on bronzes put on in the form of powder. It is recommended to thin the mass by an addition of warm water, 10 to 20 per cent, so as to keep it from becoming too hard during the process of printing. An addition of glycerine or sirup, of 5 to 10 per cent, will be even preferable. The bronze color remaining on the printing forms can be taken off by warm water.
The Edison Ore Separator Not New
To the Editor of the Scientific American:
In your issue of June 19, 1880, I notice an illustration of an electro-magnetic ore separator invented by Mr. Edison, and patented June 1, 1880.
A device absolutely identical with this has been in use for the past ten or fifteen years at the emery works at Chester, Hampden county, Mass. I there saw it in use myself in November, 1876, and was informed, I think by Mr. Ames, that it was not patented, and that no valid patent could be granted upon it by reason of its long continued public use.