I claim the square box, A, made of leather or any suitable material, when constructed with a series of round, fluted, or ruffled holders, B, on the inside, made of any firm or flexible material, a series of holders, B, being attached to each flap, C, in front, and the flaps buttoning to the sides of the box, A, as herein described and for the purpose set forth.
72,012.--DEVICE FOR HITCHING HORSES.--Samuel Galbraith, New Orleans, La.
I claim the device above described, consisting of the rings, A and B, and the pivoted curved jaws, C C, meeting at one extremity at e' e', and connected at the other by means of the rods, r r, and springs, s, working in the tube, substantially as and for the purpose specified.
72,013.--CAPPING SCREWS.--J. Gardner, New Haven, Conn.
I claim, 1st, Cutting away or depressing the cap at the point where it meets the nick in the screw head, substantially as described, so that such cut away or depressed portion, while connected with and forming part of the cap shall lie within outline the nick in the screw head, as set forth.
2d, A capped screw in which the slot or depression in the cap corresponding to the nick in the screw head is forced, substantially in the manner and for the purposes herein shown and described.
72,014.--TIGHT AND LOOSE PULLEY.--Joseph P. Gates, Lincoln, Ill.
I claim the construction of the pulley, e, in two sections, with the arrangement and combination of the ram spring, F, the rebound guard, G, the stop flange, I, the case dog, J, and spring, K, the case dog ram, L, the shuttle key, P, and stands, Z, and arm, b, with cam, a, when constructed, arranged, and operated as herein described and for the purposes set forth.
72,015.--BRICK MACHINE.--Samuel Gissinger, Allegheny City, Pa.
I claim, 1st, The device for moving the mold on to the roller way, G, consisting of the arm, l, held by a spring, m', lever, m, pin, n, on the gear wheel, o, and block, j, moving in the slot, h, substantially as described.