IMPROVED PLOW.
James Willis Hendley, Cedar Hill, N.C., assignor to David N. Bennett and Samuel T. Wright, of same place.—The objects here are simplicity and cheapness of construction, and such arrangement of parts as will prevent the plow becoming clogged with weeds, etc. The mold-board is welded to the land side, or cast in one piece with it, so that no brace or other connection is required between the mold-board and standard; secondly, the curved beam is attached to the heel of the land-side and supported by a brace, which is bolted to the middle portion of the latter, and arranged in such relation to the mold-board that a space is left between them, into which the trash will fall, and thus be drawn into the furrow and covered.
IMPROVED GRAIN DRILL.
George W. Osborn, Parkville, Mich.—This is an improved attachment for seed drills, for gaging the depth at which the grain shall be deposited in the earth. It consists in an adjustable spring gage bar attached to the shank of each drill tooth, whereby the teeth may be made to enter the ground a greater or less depth. It is claimed to ensure the planting of seeds at equal depth in hard or soft ground, and to diminish the draft.
IMPROVED HORSE HAY RAKE.
Joseph B. Wakeman and John L. Wager, Deposit, N.Y.—The construction of this implement is such that a large space is afforded beneath the rake head for the collection of hay. The pivots of said rake head back are also brought back, so that the teeth may be readily raised to discharge the collected hay. By an ingenious lever arrangement the driver is enabled to hold the rake to its work by the pressure of his foot, and also readily to discharge the hay gathered.
IMPROVED BEE HIVE.
George W. Akins, Bridgeton, Pa.—In this hive, holes are bored in the sides of the compartment for ventilation, and windows are flared for the purpose of inspecting the inside of the hive. A frame is used whenever it is desired to have the honeycomb of any particular shape. It consists of a form of tin or other suitable maternal, placed on a frame or slide, and having the shape required in the comb. Bees will build inside of the form, leaving about one fourth inch space between the form and the comb. The tin sheet receives a portion of the refuse matter, and can be readily taken out and cleaned. On the 1st of May the bees are driven out into another hive and the frames examined. Three frames are taken out and set in a new box, and three empty frames are put in their place. The old queen must be put with the new colony, and half of the bees must be put in each box and shut up, and put on a stand. The hives are to be opened the next morning. At the next natural swarming time the swarms can be again divided. The hive cannot freeze, and it is proof against mice.
IMPROVED PLOW STOCK.
Robert Weber, New Ulm, Texas.—In this invention, by loosening a nut, the point of draft attachment may be raised and lowered to cause the plow to work deeper or shallower in the ground, or turned to one or the other side, to cause the plow to take or leave land, and may be secured in place when adjusted by again tightening the nut.