This beau ideal, this suppositious excellence, in the mechanism of a plough, has been the object of great national, as well as individual research. In Great Britain, high prizes have been established for its attainment; and in France, under the ministry of Chaptal, 10,000 francs, or $2000, were offered for this object, by the agricultural society of the Seine. In both countries, the subject has employed many able pens; those of Lord Kaimes, of Mr. Young, of Mr. Arbuthnot, of Lord Somerville, and of Messieurs Duhamel, Chateauvieux, Bosc, Guillaume, &c. It is not for us, therefore, to do more than assemble and present such rules for the construction of this instrument, as have most attained the authority of maxims.
1st. The beam, or that part of the plough which carries the coulter, and furnishes the point of draft, should be as near that of resistance as possible; because the more these are approached, the less is the moving power required. Even the shape of the beam is not a matter of indifference. In the old ploughs, it was generally straight, but a small curve is now preferred; because it has the effect of strengthening the coulter, by shortening it.
2d. The head of the plough, is the plain on which it moves. This should be concave, because that form offers fewer points of friction, and, of course, less resistance. Between the beam and the head, is an angle, on which depends the principal office of the plough; the making, at will, a deep or a shallow furrow. If you wish a deep furrow, diminish the angle, and vice versa: but this angle should, in no case, exceed from 18 to 24 degrees.
The resistance made to the plough being produced less by the weight of the earth, than by the cohesion of its parts, it is evident, that the head should be shod with iron, and rendered as smooth as possible. This remark applies equally to the soc and to the mould board.
3d. The soc, in its widest part, should be larger than the head. It has different shapes in different countries. In some is given to it that of an isosceles triangle; in others, that of the head of a lance; in Biscay, that of a crescent; and in Poland, of a two pronged fork. But, whatever be its shape, it should be well pointed and polished—enter the earth with facility, and cut it easily.
4th. To the mould board, some workmen give the shape of a prismatic wedge; others make the upper part convex, and the lower concave; while many make it entirely flat. In stiff soils, the semi cycloid is the form to be preferred, and in loose friable soils the semi-ellipsis.[7] The iron mould boards have great advantages over the wooden, particularly when they, the shear and the soc, form one piece, as in the plough of Mr. Cook.
It is a general opinion, that a heavy plough is more disadvantageous than a light one; because the draft of the former, being greater, will be more fatiguing to the cattle: but the experiments of the agricultural society in London, establish a contrary doctrine, and show, that in light grounds, the labour is more easily and better performed, with a heavy, than with a light plough.
5th. The coulter is a species of knife inserted in the beam, and so placed before the soc, as to cut the sod. It is susceptible of being raised or depressed at will.
6th. The handles of the plough ought to be made of some kind of heavy wood, that they may operate as a counter-weight to the head, the soc and the mould-board.
To these remarks we subjoin two sets of experiments made with the most approved French and English ploughs; that of Guillaume, and Small's Rotheram plough improved, which furnish a means of comparison between the best ploughs of Europe and those of this country.