SCRAP OR CLIPPING BOOK
Cover of grass cloth.
18 Scrap-Book
Material—Construction paper, colored: 6-1/4×8-1/4 inches, for cover. Manila paper: three leaves 6×8 inches; three strips 1-1/8×6 inches. Two paper clamps.
Double the 6×8-inch leaves into six leaves 4×6 inches in size. Between leaves 1 and 2, 3 and 4, 5 and 6, place the 1-1/8×6-inch guards at the back. Have leaves and guards even and compact; then set them between the cover. Measure from the back edge of the cover a space three-quarters of an inch wide, and draw a pencil line. Placing the sharp edge of a ruler on this line, bend the back edge toward the front until it is well creased. In the center of this 3/4-inch space, one inch from the upper edge and one inch from the lower edge of the book, pierce a hole and insert the brass clamps.
SCRAP OR CLIPPING BOOK
Cover of linen, stenciled.