Problem—To teach how to construct a basket of grass, pine needles, or corn husks.
Material—Narrow-blade marsh or sweet grass. Raffia for sewing.
Make a design in pencil, ink, or colored crayon.
Here the adaptability of material gathered about the home is illustrated. The tall, fine marsh grasses may be collected, spread out for three or four days where they will dry, and then utilized. You will find that almost every blade of this grass varies in color. The root end may be brown, while toward the tip the leaf shades into a light green, or white, or vice versa; this blending, when the grass is bunched, is most artistic.
Bunch a sufficient number of blades to make a coil a half or three-quarters of an inch in diameter. Do not twist. Never allow the coil to lessen in size. Keep adding fresh strands by slipping the root ends of the new blades up between those already in the coil. When we begin to sew we do not wrap the grasses as we wrapped the strands of raffia, but simply use as a sewing thread raffia of a contrasting or blending color. To form the button, wrap the threads three or four times around the root ends of the bunch, fasten tightly, then coil to form the center. Take the needle through the center and over the coil as many times as you think necessary to make the button firm. These stitches are the beginning of the spiral rays which radiate to the edge of the basket. Take the stitches at equal distances from each other. Handle the needle so as to pass from back to front, and always have the new stitch pass through the stitch of the coil just below it from right to left. When the coil has been wound around four or five times, the stitches will be seen to interlock and form a spiral. Soon the spaces will become too wide; then take an extra stitch in the center of each space, thus adding another set of rays. Continue adding new sets of rays as the spaces widen, until the basket is finished.
BEGINNING OF BASKET TRAY
When the base has grown to the required size, turn up for sides and continue sewing in the same way until the necessary depth is obtained. To give a finish add enough grass to make a thick coil around the edge.