Fig. 3 shows the width rod, with the two newels marked on it.
Fig. 4 is the going rod, with newels, face of risers, joist, &c., all marked on it.
Fig. 5 shows the height rod. Mark on to this rod the two landings.
Fig. 6 shows the newels on the half-space landing. The newel A being the bottom one, runs right down to the floor, the bottom square on it being to receive the bottom handrail, while the short level rail is above this. The newel B, the top square, is to receive the top handrail, and the short rail is below it. Thus it will be seen the twining on the top newel is shorter than on the bottom one marked A.
The details will be found on the following plate.
PLATE. 5.
PLATE V.
DETAILS OF CONSTRUCTION.
Fig. 1 shows the top rail of spandril, with the tenon cut ready to go together.