Camp Life in the Woods and the Tricks of Trapping and Trap Making

by W. Hamilton Gibson

This is made by first driving into the ground two forked poles seven or eight feet in height and stout enough to sustain a ridge pole of moderate size. Against this ridge pole other poles should be rested at intervals of two feet, and sloping to the angle of forty-five degrees. The frame-work thus formed should now be covered with bark, commencing at the ground and allowing the edge of each piece to overlap the one beneath after the manner of shingles, in order to shed the rain in case of storm. Spruce or birch bark are excellent for this purpose, and the pieces may be secured with nails, and kept flat by the weight of another series of poles rested against them. The sides of the shelter should be treated similarly, the front being usually left open to face the fire, which the trapper generally builds a few feet distant. In constructing a bark shanty, it is well to select some spot protected from the wind, close to the foot of a mountain or in the midst of trees, always letting the open side face the direction most sheltered.

If desired, the front can be enclosed after the manner of the sides and top, but this is not required where the fire is used.

This style of shelter is represented in our page title to this section, and certainly looks very comfortable.

TENTS.

Shanties like the foregoing are in general use among the old veteran trappers of all countries, and even to the amateur there is a charm in a shelter constructed from the rude materials of the woods which the portable tents do not possess.

Tents, however, are much used both by professionals and amateurs, and are indeed valuable acquisitions to the trapper's outfit, and where time is valuable, do away with the labor which the construction of a hut or shanty involves.

Tents are of several kinds. Those most commonly used by the trapper are the house-tent, fly-tent, and half-tent, or shelter-tent.

The first of these is made for prop-poles and a ridge pole, closed on one end and buttoning up at the other. The sides are perpendicular for two or three feet, before the slope commences, and the stay-ropes are fastened to the eaves.

The fly-tent is generally a large, square piece of canvas, with ropes extending from opposite sides. This is thrown over a ridge pole, or over a rope extending between two trees, and the sides are held to the proper slope by tightening and pegging the side ropes to the ground. Fly-tents are also made with ends, which can be lowered, and the whole tent may be pegged close to the ground.

The shelter-tent, when erected, resembles, in general shape, the bark shanty already described. It consists of a strip of canvas, having each end cut off to a point. The tent is pitched over three slanting poles, and the ends are brought down and securely pegged. This is clearly shown in our illustration.