Robert Fulton.
In 1793, Robert Fulton, of whose exertions in the development of steam-engines and their early application to useful purposes[81] the Americans are justly proud, is said to have conceived some time previously the idea of propelling vessels by steam. It was not, however, until 1796 that any of his inventions were brought under notice: when, in that year, his plan for using small canals as a means of transit and for raising and lowering vessels on them by inclined planes was published. In the same year, 1796, it is said that he also suggested and used an apparatus for propelling vessels under water, to be employed in war,[82] but it was not until 1798 that he tried successfully to propel a boat with a steam-engine and a four bladed screw-propeller.[83] That he had shown an early taste for mechanical pursuits there can be no doubt, and, in 1801, when Napoleon contemplated the conquest of England, we know that Fulton made the friendly proposal to convey the legions of French soldiers who were to invade our shores by means of rafts propelled by steam; but, though the Emperor rejected the proposal as chimerical, Fulton, by his intercourse with the French Government, was afforded an opportunity of becoming intimately acquainted with Mr. Livingston, at that time Minister of the United States at Paris, with whom he frequently conversed on the subject of steam navigation, these communications having in the sequel very important results.
And Mr. Livingston.
Mr. Livingston, who had previously been associated with Stevens in the United States in experiments and in various plans for promoting steam navigation, entered readily into the proposals of Fulton, and, on his suggestion, a boat was built on the Seine, the engine for which was ordered in England. This experimental boat, 66 feet long, and 8 feet wide, was completed in 1803. When on the point of making her first trial, the weight of the machinery broke the boat in two and both sank. They were, however, soon raised and the necessary repairs were shortly completed, but, on trial, the boat did not move with as much speed as Mr. Fulton expected.
Plan really derived from English experiments of Symington.
Before describing Fulton’s further experiments, it may be convenient to direct attention to a statement made by Symington soon afterwards in the newspapers of the period, which remains uncontradicted, for the purpose of showing that whatever merit is due to Fulton, his information was derived from others.
There is, indeed, no doubt that, in 1802, when Symington was conducting his experiments under the patronage of Lord Dundas, a stranger came to the banks of the Forth and Clyde Canal and requested an interview, announcing himself as Mr. Fulton of the United States,[84] whither he intended to return, and expressing a desire to see Mr. Symington’s boat and machinery, and to procure some information of the principles on which it was moved, before he left Europe. He remarked that, however beneficial the invention might be to Great Britain, it would be of more importance to North America, considering the numerous navigable rivers and lakes of that continent, and the facility for procuring timber for building vessels and supplying them with fuel; that the usefulness of steam-vessels in a mercantile point of view could not fail to attract the attention of every observer; and that, if he was allowed to carry the plan to the United States, it would be advantageous to Mr. Symington, as, if his engagements would permit, the constructing or superintending of the construction of such vessels would naturally devolve upon him. Mr. Symington, in compliance with the stranger’s request, caused the engine fire to be lighted, and the machinery put in motion. Several persons entered the boat, and along with Mr. Fulton were carried from where she then lay, to Lock No. 16 on the Forth and Clyde Canal, about four miles west, and returned to the starting-place in one hour and twenty minutes, being at the rate of six miles an hour, to the astonishment of Mr. Fulton and the other gentlemen.[85]
Mr. Fulton obtained leave to take notes and sketches of the size and construction of the boat and apparatus; but he never afterwards communicated with Mr. Symington. From the concurrent testimony of Mr. Jacob Perkins, and the oaths of those present in the boat during the experiment, it is evident that Fulton availed himself of the information obtained from Symington, and ordered from Messrs. Boulton and Watt of Birmingham, a steam-engine for propelling a boat intended to be built in the United States.[86]
Fulton builds steamers in the United States.
In 1806 Mr. Fulton, in conjunction with Mr. Livingston, commenced building a steam-boat in America, in the yard of Charles Brown on the East (Hudson) River. She was decked for a short distance only at stem and stern. The engine was open to view, and a house, like that of a canal boat, was raised to cover the boiler and the apartments for the passengers and crew. There were no wheel-guards. The boiler was set in masonry. She was launched in the spring of 1807, and the engines ordered from Boulton and Watt[87] were fixed in that boat. The engine differed very little from that of the Charlotte Dundas, whose piston had a four-foot stroke, with a cylinder 22 inches in diameter, while that of the Clermont (as the American boat was named, after the residence of Mr. Livingston on the Hudson) had also a piston with a four-foot stroke, and a cylinder 24 inches in diameter. Such similarity in the dimensions of the engines could hardly have arisen from a mere accident.