Shifts and expedients of camp life, travel & exploration

by William Barry Lord; Thomas Baines

CAPE WAGGON TENT (E) TO BE TAKEN OFF AND USED AS A BOAT (G).

Such a tent as either of these might be easily constructed so as to be available for a boat whenever it might be required. First let the stanchions, screwed or lashed to the waggon sides, rise to the usual height of about five feet, and let the bows forming the flattened arch across them be of any flexible material, but preferably of straight-grained ash, such as is used for the better kind of tubs or casks. The hoops of American flour barrels would answer well; they are somewhat thin, but three might be laid together, and would be much more flexible and strong than if one piece only was used.

Of these, supposing nine bows were used, three in the front and three in the rear might be permanently secured to the stanchions, as in the illustration (E, [p. 131]), while the three central ones should be so fastened as to be readily cast off. The laths or battens, on the contrary, should be securely fastened to the central bows, so as to lift off with them, and only slightly to those at either end.

When the boat is required, it would be but an hour’s work to cast off the temporary fastenings. Take off the movable part of the top frame, draw the ends of the battens together, as shown in the illustration (G, [p. 131]), inserting at pleasure three or four smaller bows at either end, and then taking the under sail—which is generally of oiled canvas—fold down the corners so as to narrow it at either end to the shape of the boat, and stitch or lace it with eyelet-holes to the gunwale. A second thickness of unpainted canvas might always be kept upon the roof between the inner and outer sail; and if this were also laced on the boat, previously reversing the ends of the two parts of canvas, so that if any portions had been chafed while on the waggon they might not coincide with each other, the boat would be as impervious to water as wooden boats generally are.

A few spare laths, previously lashed beneath the front and aftermost bows of the tent, so as to remain there when those required for the boat were removed, and perhaps two or three duplicate bows, would prevent the necessity of leaving the vehicle destitute of cover while the boat was being used.

Sculling.

Very often the explorer may find himself alone in a boat, or he may wish to cross a river or pass from ship to shore or back again without calling other men from their duties, and in such cases he who has the power of managing a boat with a single oar, has a great advantage over one who must ask the aid of another. We have been on boat trips where the scientific officers have cheerfully manned the oars and pulled against the stream all night, and when we volunteered to take our turn, the answer was, “No; you can scull, and none of us can. Keep the steering-oar, and help us onward with it.” The first great difficulty of the novice is to get the blade of his oar under water and keep it there, and to make the loom rest firmly in the rowlock; the natural tendency of the wood to float will at first seem insuperable, but as soon as he has acquired the proper motion of the wrist he will wonder that he ever had the slightest trouble in keeping the oar to its duty.

To learn to scull, go into a boat that is either fast to the shore or vessel, or have a comrade to pull the other oar with you should you fail. Then stand on the stern-sheets on the starboard side, so that the right hand may be toward the bow of the boat; plant the left foot on the starboard side seat, and advance the right to the middle of the aftermost thwart; grasp the small end of the oar with the right hand, and the loom with the left about eight or ten inches from it, so that when the blade of the oar is horizontal the back of the hands and arms may be uppermost and also in a horizontal line. You will find that when the blade is supported by the water, the loom will not lie in the rowlock; but now depress the wrists a little, raise the hands till the blade forms an angle of 40° or 45° with the horizon, the edge farthest from you being the highest; push the oar from you as far as you can without losing your balance, then, as your first stroke ceases, drop the hands and raise the wrists till the blade inclines as much the other way, the raised edge being then nearest you; pull the loom towards you, bending backwards at the same time as far as you safely can, and you will find the arms in the proper position, with the elbows at the side, the wrists lowered, and the hands ready to rise for the stroke from you. Make short strokes at first, and do not hurry. Never mind which way the boat goes, or whether she goes at all; stick her nose in a mudbank, if you like, till you can keep your oar below the surface, then give her her head; if your oar keeps under water she must go forward, and by making a stronger sweep to starboard or to port, you may steer her at your will. If you have a long narrow boat, she will keep a straight course, but with a short dingy, she will incline at each stroke a little to the right or left, and if you use the oar regularly, her wake will show a series of graceful and equal curves.