Heel of a top-mast, the lower end, which is sustained upon the tressel-trees by means of an iron bar, called the fid. See the article Mast.
To Heel, carguer, to stoop or incline to either side. It is usually applied to a ship when she is forced into this position by the wind acting upon her sails, while braced obliquely across her; or by being ballasted so as to lean more to one side than the other. See the articles Crank, Stiff, and Trim.
HELM, gouvernail, (helme, Sax.) a long and flat piece of timber, or an assemblage of several pieces, suspended along the hind part of a ship’s stern-post, where it turns upon hinges to the right or left, serving to direct the course of the vessel, as the tail of a fish guides the body.
The helm is usually composed of three parts, viz. the rudder, the tiller, and the wheel, except in small vessels, where the wheel is unnecessary.
The length and breadth of the rudder are represented in plate [VIII]. where it is evident that it becomes gradually broader in proportion to its distance from the top, or to its depth under the water. The back, or inner part of it, which joins to the stern-post, is diminished into the form of a wedge throughout its whole length, so as that the rudder may be more easily turned from one side to the other, where it makes an obtuse angle with the keel. The hinges upon which it is supported are also expressed in this figure. Those which are bolted round the stern-post to the after extremity of the ship, are called googings, and are furnished with a large hole on the afterpart of the stern-post. The other parts of the hinges, which are bolted to the back of the rudder, are called pintles, being strong cylindrical pins, which enter into the googings, and rest upon them. The length and thickness of the rudder is nearly equal to that of the stern-post, as represented in fig. 1. plate [X].
The rudder is turned upon its hinges by means of a long bar of timber, called the tiller, which is fixed horizontally in its upper end within the vessel. The movements of the tiller to the right and left, accordingly, direct the efforts of the rudder to the government of the ship’s course as she advances, which, in the sea-language, is called steering. The operations of the tiller are guided and assisted by a sort of tackle, communicating with the ship’s side, called the tiller-rope, which is usually composed of untarred rope-yarns, for the purpose of traversing more readily through the blocks or pullies.
In order to facilitate the management of the helm, the tiller-rope, in all large vessels, is wound about a wheel, which acts upon it with the powers of a crane or windlass. The rope employed in this service being conveyed from the fore-end of the tiller k, to a single block i, on each side of the ship, (plate [III]. Deck) is farther communicated to the wheel, by means of two blocks, suspended near the mizen-mast, and two holes immediately above, leading up to the wheel, which is fixed upon an axis, on the quarter-deck, almost perpendicularly over the fore end of the tiller. Five turns of the tiller-rope are usually wound about the barrel of the wheel, and, when the helm is amidship, the middle turn is nailed to the top of the barrel, with a mark by which the helmsman readily discovers the situation of the helm, as the wheel turns it from the starboard to the larboard side. The spokes of the wheel generally reach about eight inches beyond the rim or circumference, serving as handles to the person who steers the vessel. As the effect of a lever increases in proportion to the length of its arm, it is evident that the power of the helmsman, to turn the wheel, will be increased according to the length of the spokes, beyond the circumference of the barrel.
When the helm, instead of lying in a right line with the keel, is turned to one side or the other, as in BD, fig. 1. plate [V]. it receives an immediate shock from the water, which glides along the ship’s bottom in running aft from A to B; and this fluid pushes it towards the opposite side, whilst it is retained in this position: so that the stern, to which the rudder is confined, receives the same impression, and accordingly turns from B to b about some point c whilst the head of the ship passes from A to a. It must be observed, that the current of water falls upon the rudder obliquely, and only strikes it with that part of its motion which acts according to the sine of incidence, pushing it in the direction N P, with a force which not only depends on the velocity of the ship’s course, by which this current of water is produced, but also upon the extent of the sine of incidence. This force is by consequence composed of the square of the velocity with which the ship advances, and the square of the sine of incidence, which will necessarily be greater or smaller according to circumstances; so that if the vessel runs three or four times more swiftly, the absolute shock of the water upon the rudder will be nine or sixteen times stronger under the same incidence: and, if the incidence is increased, it will yet be augmented in a greater proportion, because the square of the sine of incidence is more enlarged. This impression, or, what is the same thing, the power of the helm, is always very feeble, when compared with the weight of the vessel; but as it operates with the force of a long lever, its efforts to turn the ship are extremely advantageous. For the helm being applied to a great distance from the centre of gravity, G, or from the point about which the vessel turns horizontally, if the direction P N of the impression of the water upon the rudder be prolonged, it is evident that it will pass perpendicularly to R, widely distant from the centre of gravity G: thus the absolute effort of the water is very powerful. It is not therefore surprizing that this machine impresses the ship with a considerable circular movement, by pushing the stern from B to b, and the head from A to a; and even much farther, whilst the sails with rapidity: because the effect of the helm always keeps pace with the velocity with which the vessel advances[[31]].
Amongst the several angles that the rudder makes with the keel, there is always one position more favourable than any of the others, as it more readily produces the desired effect of turning the ship, in order to change her course. To ascertain this, it must be considered, that if the obliquity of the rudder with the keel is greater than the obtuse angle A B D, so as to diminish that angle, the action of the water upon the rudder will increase, and at the same time oppose the course of the ship in a greater degree; because the angle of incidence will be more open, so as to present a greater surface to the shock of the water, by opposing its passage more perpendicularly. But at that time the direction N P of the effort of the helm upon the ship will pass, with a smaller distance from the centre of gravity G towards R, and less approach the perpendicular N L, according to which it is absolutely necessary that the power applied should act with a greater effect to turn the vessel. Thus it is evident that if the obtuse angle A B D is too much enclosed, the greatest impulse of the water will not counterbalance the loss sustained by the distance of the direction N P from N L; or by the great obliquity, which is given to the same direction N P of the absolute effort of the helm with the keel A B. If, on the contrary, the angle A B D is too much opened, the direction N P of the force of action of the helm will become more advantageous to turn the vessel, because it will approach nearer the perpendicular N L; so that the line prolonged from N P will increase the line G R, by removing R to a greater distance from the centre of gravity G: but then the helm will receive the impression of the water too obliquely, for the angle of incidence will be more acute; so that it will only present a small portion of its breadth to the shock of the water, and by consequence will only receive a feeble effort. By this principle it is easy to conceive, that the greatest distance G R from the centre of gravity G is not sufficient to repair the diminution of force occasioned by the too great obliquity of the shock of the water. Hence we may conclude, that when the water either strikes the helm too directly, or too obliquely, it loses a great deal of the effect it ought to produce. Between the two extremes there is therefore a mean position, which is the most favourable to its operations.
The diagonal N P of the rectangle I L represents the absolute direction of the effort of the water upon the helm. N I expresses the portion of this effort which is opposed to the ship’s head-way, or which pushes her astern, in a direction parallel to the keel. It is easily perceived that this part N I of the whole power of the helm contributes but little to turn the vessel; for if I N is prolonged, it appears that its direction approaches to a very small distance G V from the centre of gravity G, and that the arm of the lever B N=G V, to which the force is applied, is not in the whole more than equal to half the breadth of the rudder: but the relative force N L, which acts perpendicular to the keel, is extremely different. If the first N I is almost useless, and even pernicious, by retarding the velocity; the second N L is capable of a very great effect, because it operates at a considerable distance from the centre of gravity G of the ship, and acts upon the arm of a lever G E, which is very long. Thus it appears, that between the effects N L and N I, which result from the absolute effort N P, there is one which always opposes the ship’s course, and contributes little to her motion of turning; whilst the other produces only this movement of rotation, without operating to retard her velocity[[32]].