Recently a company, entitled “The Indian Iron and Steel Company,” has commenced importing and and manufacturing iron and steel from Hindostan ore, and native-made bar iron.[7] If they succeed in competing with Sweden and Russia, this iron will be a valuable acquisition to the British empire. They have already issued a quantity 35 per cent. cheaper then the latter, but quality is the end they should strive for. However, the business is in able hands, and I have no doubt but that this object will be kept prominently in view.
[7] The fine quality of the Indian steel is generally acknowledged. The iron is first obtained by smelting, in small quantities, the wootz-ore, or the magnetic oxide of iron, which it found combined with about 42 per cent. of quartz; the yield being, out of 100 parts of ore, only 15 parts of metal: but this is of the finest character.
The process by which the iron is converted into steel is as follows, and fully accounts for that peculiar quality for which the Indian steel is valued.
The iron is cut into pieces and packed closely in a crucible of clay, containing about 1 lb. only of the iron, mixed with a tenth part of dried wood cut small, the whole covered over with green leaves. The crucible is then stopped, by covering the mouth with tempered clay, so as to effectually exclude the air. After a time that is, as soon as the clay-plugs are sufficiently hard, from twenty to thirty of the crucibles are built up in an arched form placed in a small blast furnace, and kept covered with charcoal; thus being subjected to the heat of the furnace for two or three hours. The process is then complete.
As soon as the crucibles are cool, they are broken open and the cakes of steel are found rounded at the bottom.
The top of the cakes should be found covered with striæ, radiating from a centre, and be free from holes or rough projections. If the cakes are honeycombed, the process has been imperfect and incomplete. When re-melted and tilted into rods, a very superior article has been the result.
The natives prepare the cakes for being drawn into bars, by annealing them for several hours in a small charcoal furnace, excited by bellows; the current of air being made to play upon the cakes while turned over before it, whereby a portion of the combined carbon is dissipated and the steel probably softened: without which operation the cakes would break in drawing them. They are drawn by a hammer of only a very few pounds weight, but the repeated hammering greatly tends to the production of a highly condensed and perfect article.
Foreseeing the difficulty that would eventually beset us in obtaining a sufficient supply of old horse nails from Germany and elsewhere, I directed my experiments to steel entirely, having formerly perceived that where the greatest quantity of steel existed in the mixture necessary to form material for their best gun barrels, there also existed the greatest tenuous strength. I had at that time a decided objection to all steel, as the following quotation from “The Gun” will show:—
“We recommend hammer-hardening in all mixtures containing iron. If you throw the iron aside, and confine your manufacture wholly to steel, it would be an evil, from this simple cause:—steel is of itself close enough in the grain; hammering it, therefore, in a cold state, only tends to make it more brittle. But the reverse is the case with iron: the more it is beaten the greater becomes its tenacity; and when mixed with steel in the way the stubs-composition is, it prevents the particles of steel from becoming too hard.”